User's Manual
Table Of Contents
- USER’S GUIDE FAX-2820/FAX-2910/FAX-2920/MFC-7220/MFC-7225N
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial setup
- General Setup
- Setting the Mode Timer (FAX-2820, FAX-2910 and FAX-2920 only)
- Setting the Mode Timer (MFC-7220 and MFC-7225N only)
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Handset Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Turning on Automatic Daylight Savings Time
- Toner Save
- Sleep Time
- Setting the LCD Contrast
- Security
- TX Lock (FAX-2820, FAX-2910 and MFC-7220 only)
- Memory Security (FAX-2920 and MFC-7225N only)
- Setting Lock
- 3 Setup Send
- 4 Setup Receive
- 5 Quick-Dial numbers and dialing options
- 6 Remote Fax Options
- 7 Printing reports
- 8 Making copies
- 9 Software and Network Features (MFC-7220 and MFC-7225N only)
- 10 Important information
- Standard telephone and FCC Notices These notices are in effect on models sold and used in the United States only.
- Federal Communications Commission (FCC) Declaration of Conformity (USA only)
- Industry Canada Compliance Statement (Canada only)
- Disconnect device
- LAN connection (MFC-7225N only)
- Laser safety
- FDA regulations
- Important safety instructions
- Trademarks
- 11 Troubleshooting and routine maintenance
- Appendix A
- Appendix B
- Glossary
- Specifications
- Product description
- General
- Print media
- Copy
- Fax
- Scanner (MFC-7220 and MFC-7225N only)
- Printer (not available for FAX-2910)
- Interfaces (not available for FAX-2910)
- Download the optional software from the Brother Web Site (FAX-2820 and FAX-2920 users only)
- At the same time, you can download the manual for setting up and using the PC-Fax software.
- Computer requirements (not available for FAX-2910)
- Consumable items
- Network (LAN) (MFC-7225N only)
- Index
- Remote Retrieval Access card
- brother USA/CAN
Remote Fax Options
6 - 4
6
Turning off Remote Fax
Options
1
Press Menu/Set, 2, 5, 1.
2
Press ▲ or ▼ to select Off.
Press Menu/Set.
3
Press Stop/Exit.
Note
If you set the remote fax options to Off and
received faxes are left in your machine’s
memory, follow the LCD messages that
appear after Step 3. (See Changing Remote
Fax Options.)
Changing Remote Fax
Options
If received faxes are left in your machine’s
memory when you change from the remote
fax options the LCD will ask you the following
question.
—OR—
■ If you press 1, faxes in the memory will be
erased or printed before the setting
changes.
■ If you press 2, faxes in the memory will not
be erased and the setting will be
unchanged.
(For MFC-7220 and MFC-7225N)
If received faxes are left in the machine’s
memory when you change to
PC Fax Receive from another remote fax
option (
Fax Forward or Fax Storage), the
LCD will ask you the following message:
■ If you press 1, faxes in the memory will be
sent to your PC before the setting
changes.
■ If you press 2, faxes in the memory will not
be erased and the setting will be
unchanged.
1.Fwd/Page/Store
Erase All Fax?
1.Yes 2.No
Print All Fax?
1.Yes 2.No
Send Fax to PC?
1.Yes 2.No