User's Manual
Table Of Contents
- USER’S GUIDE FAX-2820/FAX-2910/FAX-2920/MFC-7220/MFC-7225N
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial setup
- General Setup
- Setting the Mode Timer (FAX-2820, FAX-2910 and FAX-2920 only)
- Setting the Mode Timer (MFC-7220 and MFC-7225N only)
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Handset Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Turning on Automatic Daylight Savings Time
- Toner Save
- Sleep Time
- Setting the LCD Contrast
- Security
- TX Lock (FAX-2820, FAX-2910 and MFC-7220 only)
- Memory Security (FAX-2920 and MFC-7225N only)
- Setting Lock
- 3 Setup Send
- 4 Setup Receive
- 5 Quick-Dial numbers and dialing options
- 6 Remote Fax Options
- 7 Printing reports
- 8 Making copies
- 9 Software and Network Features (MFC-7220 and MFC-7225N only)
- 10 Important information
- Standard telephone and FCC Notices These notices are in effect on models sold and used in the United States only.
- Federal Communications Commission (FCC) Declaration of Conformity (USA only)
- Industry Canada Compliance Statement (Canada only)
- Disconnect device
- LAN connection (MFC-7225N only)
- Laser safety
- FDA regulations
- Important safety instructions
- Trademarks
- 11 Troubleshooting and routine maintenance
- Appendix A
- Appendix B
- Glossary
- Specifications
- Product description
- General
- Print media
- Copy
- Fax
- Scanner (MFC-7220 and MFC-7225N only)
- Printer (not available for FAX-2910)
- Interfaces (not available for FAX-2910)
- Download the optional software from the Brother Web Site (FAX-2820 and FAX-2920 users only)
- At the same time, you can download the manual for setting up and using the PC-Fax software.
- Computer requirements (not available for FAX-2910)
- Consumable items
- Network (LAN) (MFC-7225N only)
- Index
- Remote Retrieval Access card
- brother USA/CAN
B - 9
5. LAN
(MFC-7225N
only)
1. Setup
TCP/IP
1. BOOT Method Auto
Static
RARP
BOOTP
DHCP
You can choose the
BOOT method that best
suits your needs.
See
Network
User’s
Guide
on the
CD-ROM
2. IP Address [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP address.
3. Subnet Mask [000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet mask.
4. Gateway [000-255].
[000-255].
[000-255].
[000-255]
Enter the Gateway
address.
5. Node Name BRN_XXXXXX Enter the Node name.
6. WINS Config Auto
Static
You can choose the WINS
configuration mode.
7. WINS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address of
the primary or secondary
WINS server.
8. DNS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address of
the primary or secondary
DNS server.
9. APIPA On
Off
Automatically allocates
the IP address from the
link-local address range.
2. Setup Misc. 1. Ethernet Auto
100B-FD
100B-HD
10B-FD
10B-HD
Selects Ethernet link
mode.
0. Factory
Reset
— — Restore all network
settings to factory default.
Main Menu Submenu Menu Selections Options Descriptions Page
Note
The factory settings are shown in Bold.
to exitSelect & Set Select & Set to accept