User's Manual
Table Of Contents
- USER’S GUIDE FAX-2820/FAX-2910/FAX-2920/MFC-7220/MFC-7225N
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial setup
- General Setup
- Setting the Mode Timer (FAX-2820, FAX-2910 and FAX-2920 only)
- Setting the Mode Timer (MFC-7220 and MFC-7225N only)
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Handset Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Turning on Automatic Daylight Savings Time
- Toner Save
- Sleep Time
- Setting the LCD Contrast
- Security
- TX Lock (FAX-2820, FAX-2910 and MFC-7220 only)
- Memory Security (FAX-2920 and MFC-7225N only)
- Setting Lock
- 3 Setup Send
- 4 Setup Receive
- 5 Quick-Dial numbers and dialing options
- 6 Remote Fax Options
- 7 Printing reports
- 8 Making copies
- 9 Software and Network Features (MFC-7220 and MFC-7225N only)
- 10 Important information
- Standard telephone and FCC Notices These notices are in effect on models sold and used in the United States only.
- Federal Communications Commission (FCC) Declaration of Conformity (USA only)
- Industry Canada Compliance Statement (Canada only)
- Disconnect device
- LAN connection (MFC-7225N only)
- Laser safety
- FDA regulations
- Important safety instructions
- Trademarks
- 11 Troubleshooting and routine maintenance
- Appendix A
- Appendix B
- Glossary
- Specifications
- Product description
- General
- Print media
- Copy
- Fax
- Scanner (MFC-7220 and MFC-7225N only)
- Printer (not available for FAX-2910)
- Interfaces (not available for FAX-2910)
- Download the optional software from the Brother Web Site (FAX-2820 and FAX-2920 users only)
- At the same time, you can download the manual for setting up and using the PC-Fax software.
- Computer requirements (not available for FAX-2910)
- Consumable items
- Network (LAN) (MFC-7225N only)
- Index
- Remote Retrieval Access card
- brother USA/CAN
B - 7
2. Fax
(Continued)
3. Set
Quick-Dial
1. One-Touch
Dial
— Stores One-Touch Dial
numbers, so you can dial
by pressing one key (and
Start).
5-1
2. Speed-Dial — Stores Speed-Dial
numbers, so you can dial
by pressing only a few
keys (and Start).
5-2
3.Setup
Groups
— Sets up a Group number
for Broadcasting.
5-3
4.Report
Setting
1.Transmission On
On+Image
Off
Off+Image
Initial setup for
Transmission Verification
Report and Fax Journal.
7-1
2.Journal
Period
Every 7 Days
Every 2 Days
Every 24 Hours
Every 12 Hours
Every 6 Hours
Every 50 Faxes
Off
7-2
5. Remote Fax
Opt
1.
Fwd/Page/Store
Off
Fax Forward
Paging
Fax Storage
PC Fax Receive*
*MFC-7220 and
MFC-7225N only
Sets the machine to
forward fax messages, to
call your pager or to store
incoming faxes in the
memory (so you can
retrieve them while you
are away from your
machine). The PC Fax
Receive option on MFC
models allow you to send
faxes to your PC.
6-1
6-2
6-3
(Backup Print) If you selected Fax
Forward or PC Fax
Receive, you can turn on
the safety feature Backup
Print.
2. Remote
Access
--- You must set your own
code for Remote
Retrieval.
6-5
3. Print Fax — Prints incoming faxes
stored in the memory.
4-5
Main Menu Submenu Menu Selections Options Descriptions Page
Note
The factory settings are shown in Bold.
to exitSelect & Set Select & Set to accept