User's Manual
Table Of Contents
- USER’S GUIDE FAX-2820/FAX-2910/FAX-2920/MFC-7220/MFC-7225N
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial setup
- General Setup
- Setting the Mode Timer (FAX-2820, FAX-2910 and FAX-2920 only)
- Setting the Mode Timer (MFC-7220 and MFC-7225N only)
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Handset Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Turning on Automatic Daylight Savings Time
- Toner Save
- Sleep Time
- Setting the LCD Contrast
- Security
- TX Lock (FAX-2820, FAX-2910 and MFC-7220 only)
- Memory Security (FAX-2920 and MFC-7225N only)
- Setting Lock
- 3 Setup Send
- 4 Setup Receive
- 5 Quick-Dial numbers and dialing options
- 6 Remote Fax Options
- 7 Printing reports
- 8 Making copies
- 9 Software and Network Features (MFC-7220 and MFC-7225N only)
- 10 Important information
- Standard telephone and FCC Notices These notices are in effect on models sold and used in the United States only.
- Federal Communications Commission (FCC) Declaration of Conformity (USA only)
- Industry Canada Compliance Statement (Canada only)
- Disconnect device
- LAN connection (MFC-7225N only)
- Laser safety
- FDA regulations
- Important safety instructions
- Trademarks
- 11 Troubleshooting and routine maintenance
- Appendix A
- Appendix B
- Glossary
- Specifications
- Product description
- General
- Print media
- Copy
- Fax
- Scanner (MFC-7220 and MFC-7225N only)
- Printer (not available for FAX-2910)
- Interfaces (not available for FAX-2910)
- Download the optional software from the Brother Web Site (FAX-2820 and FAX-2920 users only)
- At the same time, you can download the manual for setting up and using the PC-Fax software.
- Computer requirements (not available for FAX-2910)
- Consumable items
- Network (LAN) (MFC-7225N only)
- Index
- Remote Retrieval Access card
- brother USA/CAN
Chapter 11
11 - 25
How to replace the toner
cartridge
1
Open the front cover and pull out the
drum unit and toner cartridge assembly.
2
Hold down the lock lever on the left and
pull the toner cartridge out of the drum
unit.
WARNING
Just after you use the machine,
some internal parts of the machine will be
extremely HOT! Never touch the shaded
parts shown in the illustration.
CAUTION
To prevent damage to the machine from
static electricity, do not touch the
electrodes shown below.
CAUTION
■ Place the drum unit on a drop cloth or
large piece of disposable paper to
avoid spilling and scattering the toner.
■ Handle the toner cartridge carefully. If
toner scatters on your hands or
clothes, immediately wipe it off or wash
it with cold water.
■ Brother strongly recommends that you
do not refill the toner cartridge provided
with your machine. We also strongly
recommend that you continue to use
only Genuine Brother Brand
replacement toner cartridges (TN-350).
Using or attempting to use potentially
incompatible toner and/or toner
cartridges in your machine may cause
damage to the machine itself and/or it
may result in unsatisfactory print
quality. Our warranty coverage does
not apply to any problem that was
caused by the use of unauthorized
third party toner and toner cartridges.
To protect your investment and
guarantee your print quality please
continue to replace consumed toner
cartridges with only Genuine Brother
Branded Supplies.