Owner's Manual
Table Of Contents
- USER’S GUIDE FAX-2820/FAX-2910/FAX-2920/MFC-7220/MFC-7225N
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial setup
- General Setup
- Setting the Mode Timer (FAX-2820, FAX-2910 and FAX-2920 only)
- Setting the Mode Timer (MFC-7220 and MFC-7225N only)
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Handset Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Turning on Automatic Daylight Savings Time
- Toner Save
- Sleep Time
- Setting the LCD Contrast
- Security
- TX Lock (FAX-2820, FAX-2910 and MFC-7220 only)
- Memory Security (FAX-2920 and MFC-7225N only)
- Setting Lock
- 3 Setup Send
- 4 Setup Receive
- 5 Quick-Dial numbers and dialing options
- 6 Remote Fax Options
- 7 Printing reports
- 8 Making copies
- 9 Software and Network Features (MFC-7220 and MFC-7225N only)
- 10 Important information
- Standard telephone and FCC Notices These notices are in effect on models sold and used in the United States only.
- Federal Communications Commission (FCC) Declaration of Conformity (USA only)
- Industry Canada Compliance Statement (Canada only)
- Disconnect device
- LAN connection (MFC-7225N only)
- Laser safety
- FDA regulations
- Important safety instructions
- Trademarks
- 11 Troubleshooting and routine maintenance
- Appendix A
- Appendix B
- Glossary
- Specifications
- Product description
- General
- Print media
- Copy
- Fax
- Scanner (MFC-7220 and MFC-7225N only)
- Printer (not available for FAX-2910)
- Interfaces (not available for FAX-2910)
- Download the optional software from the Brother Web Site (FAX-2820 and FAX-2920 users only)
- Computer requirements (not available for FAX-2910)
- Consumable items
- Network (LAN) (MFC-7225N only)
- Index
- Remote Retrieval Access card
- brother USA/CAN
Troubleshooting and routine maintenance
11 - 22
11
2
Wipe the outside of the machine with a
soft cloth to remove dust.
3
Remove anything that is stuck inside the
paper tray.
4
Wipe the inside of the paper tray with a
soft cloth to remove the dust.
5
Re-load the paper and put the paper tray
in the machine.
Cleaning the scanner glass
1 Turn off the machine’s power switch.
2
Lift the control panel cover.
3
Moisten a small clean soft, lint-free cloth
with isopropyl alcohol and carefully
remove dirt from the glass strip and the
white bar above it.
4
Close the control panel cover.
I
Cleaning the laser scanner
window
1
Before you clean the inside of the
machine, turn off the machine’s power
switch.
Unplug the telephone line cord first, and
then unplug the power cord from the AC
power outlet.
CAUTION
■ Do not use isopropyl alcohol to clean
the laser scanner window.
■ Do not touch the laser scanner window
with your fingers.
Control
Panel Cover
White Bar
Glass
Strip