Printer/Fax/Scanner/Copier User's Guide

General setup
27
3
Paper settings 3
Paper Size and Type 3
To get the best print quality, set the machine
for the type of paper you are using.
You can use seven sizes of paper for printing
and copying: Ledger, Letter, Legal, A3, A4,
A5 and 4 × 6in. (10× 15 cm) and five sizes
for printing faxes: Ledger, Letter, Legal, A3 or
A4. When you load a different size of paper in
the machine, you will need to change the
paper size setting at the same time so your
machine can fit an incoming fax on the page.
a Press Menu.
b Press a or b to chose General Setup.
Press OK.
c Press a or b to chose Tray Setting.
Press OK.
d Press a or b to choose Tray#1 or
Tray#2.
Press OK.
e Do one of the following:
 If you chose Tray#1, press d or c to
choose Plain Paper,
Inkjet Paper, Brother BP71,
Other Glossy or
Transparency.
Press OK.
Press a or b to choose Paper Size
and press d or c to choose Letter,
Legal, Ledger, A4, A5, A3 or
4"x6".
Press OK.
 If you chose Tray#2, press a or b to
choose Paper Size and press
d or c to choose Letter, Legal,
Ledger, A4 or A3.
Press OK.
f Press Stop/Exit.
Note
• You can only use plain paper sizes
Ledger, Letter, Legal, A3 or A4 in Tray #2.
• The machine ejects paper with printed
surfaces face up onto the paper tray in
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
Tray use in Copy mode 3
You can change the default tray the machine
will use for printing copies.
To change the default setting follow the
instructions below:
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Tray Setting.
Press OK.
d Press a or b to choose
Tray Use:Copy.
e Press d or c to choose Tray#1 or
Tray#2.
Press OK.
f Press Stop/Exit.
Note
You can change the paper size and tray
selection temporarily for the next copy.
(See Paper Size on page 99 and Tray
Select on page 100.)