Printer/Fax/Scanner/Copier User's Guide

PhotoCapture Center
®
: Printing photos from a memory card or USB Flash memory drive
123
12
Glass Scan Size 12
To scan a Legal, Ledger, A3 or A4 size
document, you need to change the
Glass ScanSize setting. The default
setting is Letter.
a Press (Scan).
b Press a or b to choose
Scan to Media.
Press OK.
c Press a or b to choose
Glass ScanSize.
d Press d or c to choose Letter, Legal,
Ledger, A3 or A4.
Press OK.
Note
• You can save the setting you use most
often by setting it as the default. (See
Setting your changes as the new default
on page 121.)
• This setting is only available for scanning
documents from the scanner glass.
How to change the file name 12
You can change the file name.
a Press (Scan).
b Press a or b to choose
Scan to Media.
c Press a or b to choose File Name.
d Enter the new name using the dial pad.
You can only change the first 6 digits.
(See Entering Text on page 198.)
How to set a new default 12
You can set your own default setting.
a Press (Scan).
b Press a or b to choose
Scan to Media.
Press OK.
c Press a or b to choose
Set New Default. Press 1 to choose
Yes.
d Press Stop/Exit.
How to reset factory setting 12
You can restore the factory settings.
a Press (Scan).
b Press a or b to choose
Scan to Media.
Press OK.
c Press a or b to choose
Factory Reset. Press 1 to choose
Yes.
d Press Stop/Exit.