User`s guide

3 - 14 SETUP SEND
Setup for Polled Transmit (Standard)
(Monochrome only)
Polled Transmit is when you set up the machine to wait with a
document so another fax machine can retrieve it.
1 If it is not illuminated in green, press (Fax).
2 Load your document.
3 Press Menu/Set, 2, 2, 6.
4 Press ▲ or ▼ to select Standard.
Press
Menu/Set.
Setup for Polled Transmit with Secure Code
(Monochrome only)
When you choose Polled TX:Secure, anyone who polls the
machine must enter the polling secure code.
1 If it is not illuminated in green, press (Fax).
2 Load your document.
3 Press Menu/Set, 2, 2, 6.
4 Press ▲ or ▼ to select Secure.
Press
Menu/Set.
5 Enter a four-digit number.
Press
Menu/Set.
Once a document has been stored in memory for polling
transmit, it can be sent and received more than once.
The document will be stored in the machine’s memory and can
be retrieved from any other fax machine until you delete the fax
in memory by using the Cancelling a job menu setting.
(See Cancelling a waiting job on page 3-10.)
You can use Secure Polling only with another Brother fax
machine.