Operation Manual

Chapter 12
116
Glass Scan Size
(MFC-6490CW only) 12
To scan a Letter, Legal, Ledger, or A3 size
document, you need to change the
Glass ScanSize setting. The default
setting is A4.
a Press (Scan).
b Press a or b to choose
Scan to Media.
Press OK.
c Press a or b to choose
Glass ScanSize.
d Press d or c to choose A4, A3, Letter,
Legal or Ledger.
Note
• You can save the setting you use most
often by setting it as the default. (See
Setting your changes as a new default
on page 114.)
• This setting is only available for scanning
documents from the scanner glass.
How to change the file name 12
You can change the file name.
a Press (Scan).
b Press a or b to choose
Scan to Media.
Press OK.
c Press a or b to choose File Name.
d Enter the new name using the dial pad.
You can only change the first 6 digits.
(See Entering Text on page 194.)
How to set a new default 12
You can set your own default setting.
a Press (Scan).
b Press a or b to choose
Scan to Media.
Press OK.
c Press a or b to choose
Set New Default.
Press OK and 1 to choose Yes.
d Press Stop/Exit.
How to reset to factory
settings 12
You can restore the machine to factory
settings.
a Press (Scan).
b Press a or b to choose
Scan to Media.
Press OK.
c Press a or b to choose
Factory Reset.
Press OK and 1 to choose Yes.
d Press Stop/Exit.