User Manual

40
5
Entering Fax mode 5
When you want to send a fax, or change fax
send or receive settings, press the
(Fax) key to illuminate it in blue.
The LCD shows:
Press a or b to scroll through the Fax key
options. Some functions are only available
when sending monochrome faxes.
 Fax Resolution (See page 45.)
 Contrast (See page 45.)
 Glass ScanSize
(MFC-5890CN: See page 41.)
(MFC-6490CW: See page 42.)
 Phone Book (See page 71.)
 Outgoing Call (See page 72.)
 Caller ID hist. (See page 73.)
 Broadcasting (See page 43.)
 Delayed Fax (See page 46.)
 Batch TX (See page 47.)
 Real Time TX (See page 46.)
 Polled TX (See page 85.)
 Polling RX (See page 83.)
 Overseas Mode (See page 46.)
 Set New Default (See page 47.)
 Factory Reset (See page 47.)
When the option you want is highlighted,
press OK.
Faxing from the ADF 5
a Press (Fax).
b Place the document face up in the ADF.
(See Using the ADF on page 23.)
c Enter the fax number using the dial pad,
One Touch, Speed Dial or Search.
Note
You can preview a fax message before
sending it by pressing Fax Preview.
(See How to preview an outgoing fax
on page 42.)
d Press Mono Start or Color Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If you send a mono fax when the memory
is full it will be sent in real time.
•
You can send color faxes up to A4 in size.
Sending a Fax 5
Fax Resolution
FAX
Standard
Auto
A4Glass ScanSize
Phone Book
Contrast
Fax Press Start