User Manual
Table Of Contents
- USER’S GUIDEMFC-5890CN MFC-6490CW
- Approval Information and Compilation and Publication Notice
- Table of Contents
- Section I General
- 1 General Information
- 2 Loading paper and documents
- 3 General setup
- 4 Security features
- Section II Fax
- 5 Sending a Fax
- Entering Fax mode
- Broadcasting (Monochrome only)
- Additional sending operations
- Sending faxes using multiple settings
- Contrast
- Changing fax resolution
- Dual access (Monochrome only)
- Real time transmission
- Overseas Mode
- Delayed Faxing (Monochrome only)
- Delayed Batch Transmission (Monochrome only)
- Checking and cancelling waiting jobs
- Setting your changes as a new default
- Restoring all settings to the factory settings
- Sending a fax manually
- Out of Memory message
- 6 Receiving a Fax
- 7 Telephone and External devices
- 8 Dialling and storing numbers
- 9 Printing Reports
- 10 Polling
- 5 Sending a Fax
- Section III Copy
- 11 Making copies
- How to copy
- Copy settings
- Changing copy speed and quality
- Enlarging or reducing the image copied
- Making N in 1 copies or a poster (Page Layout)
- Sorting copies using the ADF
- Adjusting Brightness and Contrast
- Paper Options
- Skew Adjustment (MFC-6490CW only)
- Book Copy
- Watermark Copy
- Setting your changes as a new default
- Restoring all settings to the factory settings
- ‘Out of Memory’ message
- 11 Making copies
- Section IV Direct Photo Printing
- Section V Software
- Section VI Appendixes
- A Safety and Legal
- B Troubleshooting and Routine Maintenance
- C Menu and Features
- D Specifications
- E Glossary
- Index
- brother CHN-ENG
General setup
29
3
Tray use in Copy mode
(MFC-6490CW only) 3
You can change the default tray the machine
will use for printing copies.
To change the default setting follow the
instructions below:
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Tray Setting.
Press OK.
d Press a or b to choose
Tray Use:Copy.
e Press d or c to choose Tray#1 or
Tray#2.
Press OK.
f Press Stop/Exit.
Note
You can change the paper size and tray
selection temporarily for the next copy.
(See Paper Size on page 93 and Tray
Select (MFC-6490CW only) on page 93.)
Tray use in Fax mode
(MFC-6490CW only) 3
You can change the default tray the machine
will use for printing received faxes.
Auto Select will allow your machine to
take paper from Tray #1 first, or from Tray #2
if:
Tray #1 is out of paper.
Tray #2 is set to a different paper size that
is more suitable for the received faxes.
Both trays are using the same size paper
and Tray #1 is not set to use plain paper.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Tray Setting.
Press OK.
d Press a or b to choose Tray Use:Fax.
e Press d or c to choose Tray#1,
Tray#2 or Auto Select.
Press OK.
f Press Stop/Exit.