Network User's Guide for Internet Fax
Table Of Contents
- Internet FAX User’s Guide
- Table of Contents
- 1 Control Panel Setup
- 2 Internet FAX
- 3 Configuring Internet Printing for Windows®
- Internet Printing Installation
- Overview
- Brother Internet Print General Information
- Brother Internet Print Configuring the Brother Print/Fax Server
- Brother Internet Print Using BRAdmin Professional utility to Configure the Print Server
- Brother Internet Print Installing the BIP software on Windows® 98/Me/2000/XP
- Adding a Second Brother Internet Port
- Other Sources of Information
- Internet Printing Installation
- INDEX
CONTROL PANEL SETUP 1 - 6
NC9100h_FM6.0
Gateway
This field displays the current gateway or router address used by the
machine. If you are not using DHCP or BOOTP to obtain the gateway
or router address, enter the address you wish to assign. If you do not
have a gateway or router, leave this field blank. Check with your
network manager if you are unsure.
1
Press Menu/Set, 5, 1, 4 for MFC-3340CN/MFC-5840CN. (4,
1, 4 for FAX-1940CN/MFC-5440CN)
2
Enter the Gateway address.
---OR---
Select 1.Change and enter the Gateway address.
3
Press Menu/Set.
4
Press Stop/Exit.
Host Name
You can register the machine name on the Network. This name is
often referred to as a NetBIOS name; it will be the name that is
registered by the WINS server on your network. Brother
recommends the name BRN_XXXXXX (where XXXXXX is the last
six digits of the Ethernet address) (up to 15 characters).
1
Press Menu/Set, 5, 1, 5 for MFC-3340CN/MFC-5840CN. (4,
1, 5 for FAX-1940CN/MFC-5440CN)
2
Select 1.Change and enter the Host Name.
3
Press Menu/Set.
4
Press Stop/Exit.
WINS Config
This selection controls how the machine obtains the IP address for
the WINS Server.
1
Press Menu/Set, 5, 1, 6 for MFC-3340CN/MFC-5840CN. (4,
1, 6 for FAX-1940CN/MFC-5440CN)