Network User's Guide for Internet Fax
Table Of Contents
- Internet FAX User’s Guide
- Table of Contents
- 1 Control Panel Setup
- 2 Internet FAX
- 3 Configuring Internet Printing for Windows®
- Internet Printing Installation
- Overview
- Brother Internet Print General Information
- Brother Internet Print Configuring the Brother Print/Fax Server
- Brother Internet Print Using BRAdmin Professional utility to Configure the Print Server
- Brother Internet Print Installing the BIP software on Windows® 98/Me/2000/XP
- Adding a Second Brother Internet Port
- Other Sources of Information
- Internet Printing Installation
- INDEX
1 - 1 CONTROL PANEL SETUP
1
NC9100h_FM6.0
1
Control Panel Setup
LAN Main Setup Menu
You can use the Internet FAX feature after downloading the
software, to use this function, you must set up your machine using
the control panel LAN menu.
The LAN menu selections allow you to setup the Brother machine for
your network and Internet Fax configuration. Press
Menu/Set then
press the appropriate number,
5 for LAN (MFC-3340CN/MFC-
5840CN) or
4 for LAN (FAX-1940CN/MFC-5440CN). In the LAN
Main Setup menu, there are eight main selections: Setup TCP/IP,
Setup Internet, Setup Mail RX, Setup Mail TX, Setup Relay,
Setup Misc, Setup I-Fax, and Factory Reset. If you already have
the TCP/IP settings configured for your network then proceed to
Setup Internet on page
1-9 . Proceed to the menu selection you
wish to configure.
The machine is supplied with the BRAdmin Professional
Windows
®
software, which can be used to configure many
aspects of the network.