Network User's Guide for Internet Fax
Table Of Contents
- Internet FAX User’s Guide
- Table of Contents
- 1 Control Panel Setup
- 2 Internet FAX
- 3 Configuring Internet Printing for Windows®
- Internet Printing Installation
- Overview
- Brother Internet Print General Information
- Brother Internet Print Configuring the Brother Print/Fax Server
- Brother Internet Print Using BRAdmin Professional utility to Configure the Print Server
- Brother Internet Print Installing the BIP software on Windows® 98/Me/2000/XP
- Adding a Second Brother Internet Port
- Other Sources of Information
- Internet Printing Installation
- INDEX
1 - 19 CONTROL PANEL SETUP
NC9100h_FM6.0
Setup Misc.
Ethernet
Ethernet link mode. Auto allows the print server to operate in
100BaseTX full or half duplex, or in 10BaseT half duplex mode by
auto negotiation.
100BaseTX Full Duplex (100B-FD) or Half Duplex (100B-HD) and
10BaseT Full Duplex (10B-FD) or Half Duplex (10B-HD) fix the print
server link mode. This change is valid after the print server has been
reset (default is Auto).
1
Press Menu/Set, 5, 6, 1 for MFC-3340CN/MFC-5840CN. (4,
6, 1 for FAX-1940CN/MFC-5440CN)
2
Press ▲ or ▼ to select Auto/100B-FD/100B-HD/
10B-FD/10B-HD.
3
Press Menu/Set.
4
Press Stop/Exit.
Time Zone
This field displays the time zone you can set for your country. The
time is the difference between your location and Greenwich Mean
Time. This time will be shown on documents received via the
Internet. For example the Time Zone for Eastern Time in the USA
and Canada is GMT-05:00.
1
Press Menu/Set, 5, 6, 2 for MFC-3340CN/MFC-5840CN. (4,
6, 2 for FAX-1940CN/MFC-5440CN)
2
Press ▲ or ▼ to enter the time.
3
Press Menu/Set.
4
Press Stop/Exit.
If you incorrectly set this value, you may not be able to
communicate with your print server.