User Manual
Table Of Contents
- Network User’s Guide NC-110h
- IMPORTANT INFORMATION: REGULATIONS
- Table of Contents
- 1. Introduction
- 2. TCP/IP Configuration
- 3. Front Panel Setup
- 4. Network Printing from Windows® (Peer to Peer)
- 5. Network Printing from Macintosh®
- 6. Troubleshooting
- Appendix
- INDEX
3 - 10 FRONT PANEL SETUP
NC9100h_FM6.0
WINS Config
This selection controls how the machine obtains the IP address for
the WINS server.
(For MFC-410CN, MFC-620CN, MFC-3340CN, MFC-5440CN,
MFC-5840CN)
1
Press Menu/Set, 5, 1, 6. (4, 1, 6 for MFC-5440CN)
2
Press ▲ or ▼ to select Auto or Static.
3
Press Menu/Set.
4
Press Stop/Exit.
(For DCP-310CN)
1
Press Menu.
2
Press ▲ or ▼ to select 3.LAN.
Press Set.
3
Press ▲ or ▼ to select 1.Setup TCP/IP.
Press Set.
4
Press ▲ or ▼ to select 6.WINS Config.
Press Set.
5
Press ▲ or ▼ to select Auto or Static.
Press Set.
6
Press Stop/Exit.
Auto
Automatically uses a DHCP request to determine the IP addresses
for the primary and secondary WINS servers. You must set the
BOOT Method to Auto for this feature to work.
Static
Uses a specified IP address for the primary and secondary WINS
servers.