User Manual
Table Of Contents
- USER’S GUIDE MFC-5440CN/MFC-5840CN
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial Setup
- General Setup
- Setting the Mode Timer
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Turning on Automatic Daylight Savings Time
- Setting the LCD Contrast
- Setting the Tray Use for Copy mode (MFC-5840CN only)
- Setting the Tray Use for Fax mode (MFC-5840CN only)
- 3 Setup Send
- 4 Setup Receive
- 5 Quick-Dial numbers and dialing options
- 6 Remote Fax Options (Not available for color faxes)
- 7 Printing reports
- 8 Making copies
- 9 Walk-Up PhotoCapture Center™ (MFC-5840CN only)
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother USA/CAN
PRINTING REPORTS 7 - 3
Printing reports
Following reports are available:
How to print a report
1
For MFC-5440CN, press
Reports
.
For MFC-5840CN, press
Menu/Set
,
6
.
2
Press
▲
or
▼
to select the report you want.
Press
Menu/Set
.
—OR—
Enter the number of the report you want to print.
For example, press
1
to print the Help List.
3
Press
Black Start
.
1.Help List
Prints the Help List so you can see at-a-glance
how to quickly program your MFC.
2.Quick-Dial
Lists names and numbers stored in the
Speed-Dial memory, in numerical order.
3.Fax Journal
Lists information about the last incoming and
outgoing faxes.
(TX means Transmit.) (RX means Receive.)
4.Transmission
Prints a Transmission Verification Report for your
last transmission.
5.User Settings
Lists your settings.
6.Network Config
Lists your Network settings.