User Manual
Table Of Contents
- USER’S GUIDE MFC-5440CN/MFC-5840CN
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial Setup
- General Setup
- Setting the Mode Timer
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Turning on Automatic Daylight Savings Time
- Setting the LCD Contrast
- Setting the Tray Use for Copy mode (MFC-5840CN only)
- Setting the Tray Use for Fax mode (MFC-5840CN only)
- 3 Setup Send
- 4 Setup Receive
- 5 Quick-Dial numbers and dialing options
- 6 Remote Fax Options (Not available for color faxes)
- 7 Printing reports
- 8 Making copies
- 9 Walk-Up PhotoCapture Center™ (MFC-5840CN only)
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother USA/CAN
SETUP SEND 3 - 15
Delayed Batch Transmission
(Not available for color faxes)
Before sending the delayed faxes, your MFC will help you economize
by sorting all the faxes in the memory by destination and scheduled
time. All delayed faxes that are scheduled to be sent at the same
time to the same fax number will be sent as one fax to save
transmission time.
1
If it is not illuminated in green, press (
Fax
).
2
Press
Menu/Set
,
2
,
2
,
4
.
3
Press
▲
or
▼
to select
On
(or
Off
).
Press
Menu/Set
.
4
Press
Stop/Exit
.
Faxing A4 size documents from the scanner glass
When documents are A4 size, you need to set Scan Glass Size to
A4; if you do not, the bottom portion of the faxes will be missing.
1
Press
Menu/Set
,
2
,
2
,
0
.
2
Press
▲
or
▼
to select
A4
(or
Letter
).
Press
Menu/Set
.
3
Press
Stop/Exit
.
The document will be stored and can be retrieved from any other
fax machine until you delete the fax in memory by using the
Canceling a job menu setting. (See Canceling a scheduled job
on page 3-11.)
Setup Send
4.Batch TX