User Manual
Table Of Contents
- USER’S GUIDE MFC-5440CN/MFC-5840CN
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial Setup
- General Setup
- Setting the Mode Timer
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Turning on Automatic Daylight Savings Time
- Setting the LCD Contrast
- Setting the Tray Use for Copy mode (MFC-5840CN only)
- Setting the Tray Use for Fax mode (MFC-5840CN only)
- 3 Setup Send
- 4 Setup Receive
- 5 Quick-Dial numbers and dialing options
- 6 Remote Fax Options (Not available for color faxes)
- 7 Printing reports
- 8 Making copies
- 9 Walk-Up PhotoCapture Center™ (MFC-5840CN only)
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother USA/CAN
GETTING STARTED 2 - 7
Setting the LCD Contrast
You can adjust the LCD contrast for a sharper and more vivid
display. If you are having difficulty reading the LCD from your
position, try changing the contrast setting for improved viewing.
1
Press
Menu/Set
,
1
,
7
.
2
Press
▲
or
▼
to select
Light
or
Dark
.
Press
Menu/Set
.
3
Press
Stop/Exit
.
Setting the Tray Use for Copy mode
(MFC-5840CN only)
The MFC uses the paper in Tray#1 first. You can change the default
tray that will be used for copying.
1
Press
Menu/Set
,
1
,
8
.
2
Press
▲
or
▼
to select
Tray#1 Only
,
Tray#2 Only
, or
Auto Select
.
Press
Menu/Set
.
3
Press
Stop/Exit
.
■
If both trays are using paper that is the same type and size,
Auto Select
will allow your MFC to take paper from Tray#2
if Tray#1 is out of paper.
■
You can only use plain paper sizes Letter, Legal or A4 in
Tray#2.
General Setup
7.LCD Contrast
General Setup
8.Tray Use:Copy