User Manual

GETTING STARTED 2 - 3
General Setup
Setting the Mode Timer
The MFC has three temporary mode keys on the control panel: Fax,
Scan and Copy. The PhotoCapture key (MFC-5840CN only) is also
a temporary mode key. You can change the number of seconds or
minutes that the MFC takes after the last Scan, Copy or
PhotoCapture operation before it returns to Fax mode. If you select
Off
, the MFC stays in the mode you used last.
1
Press
Menu/Set
,
1
,
1
.
2
Press
▲
or
▼
to select
0 Sec
,
30 Secs
,
1 Min
,
2 Mins
,
5 Mins
or
Off
.
Press
Menu/Set
.
3
Press
Stop/Exit
.
Setting the Paper Type
To get the best print quality, set the MFC for the type of paper you
are using.
1
Press
Menu/Set
,
1
,
2
.
2
Press
▲
or
▼
to select
Plain
,
Inkjet
,
Glossy
or
Transparency
.
Press
Menu/Set
.
3
Press
Stop/Exit
.
■
The MFC ejects paper with printed surfaces face up onto the
paper tray in the front of the machine. When you use
transparencies or glossy paper, remove each sheet
immediately to prevent smudging or paper jams.
■
(MFC-5840CN only)
You can only use plain paper in Tray#2.
(MFC-5840CN only)
General Setup
1.Mode Timer
General Setup
2.Paper Type