User Manual
Table Of Contents
- USER’S GUIDE MFC-5440CN/MFC-5840CN
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial Setup
- General Setup
- Setting the Mode Timer
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Turning on Automatic Daylight Savings Time
- Setting the LCD Contrast
- Setting the Tray Use for Copy mode (MFC-5840CN only)
- Setting the Tray Use for Fax mode (MFC-5840CN only)
- 3 Setup Send
- 4 Setup Receive
- 5 Quick-Dial numbers and dialing options
- 6 Remote Fax Options (Not available for color faxes)
- 7 Printing reports
- 8 Making copies
- 9 Walk-Up PhotoCapture Center™ (MFC-5840CN only)
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother USA/CAN
1 - 14 INTRODUCTION
Printable area
The printable area depends on the settings in the application you are
using. The figures below show the unprintable areas on cut sheet
paper and envelopes.
1Top 2
Bottom
3Left 4Right
Cut Sheet
0.12 in.
(0 in.)*
1
0.12 in.
(0 in.)*
1
0.12 in.
(0 in.)*
1
0.12 in.
(0 in.)*
1
Envelopes 0.47 in. 0.94 in. 0.12 in. 0.12 in.
*1 When you set the Borderless feature to On.
■
Printable area depends on the Printer driver settings.
■
The figures above are approximate and the printable area
may vary depending on the type of cut sheet paper you are
using.
■
(MFC-5840CN only)
You can use the borderless feature with Tray#1 only.
1
34
2
1
34
2
EnvelopesCut Sheet Paper
■ unprintable area