User Manual

G - 4 GLOSSARY
Overseas Mode Makes temporary changes to the fax tones to
accommodate noise and static on overseas phone lines.
Paging This feature enables your MFC to call your pager when a fax
is received into its memory.
Pause Allows you to place a 3.5 second delay in the dialing
sequence stored on Speed-Dial numbers. Press
Redial/Pause
as many times as needed for longer pauses.
PhotoCapture Center
™
(MFC-5840CN only) Allows you to print
digital photos from your digital camera at high resolution for photo
quality printing.
Photo resolution A resolution setting that uses varying shades of
gray for the best representation of photographs.
Polling The process of a fax machine calling another fax machine
to retrieve waiting fax messages.
Pulse A form of rotary dialing on a telephone line.
Quick Dial List A listing of names and numbers stored in
Speed-Dial memory, in numerical order.
Real Time Transmission When memory is full, you can send faxes
in real time.
Remaining jobs You can check which jobs are waiting in memory
and cancel jobs individually.
Remote Access Code Your own four-digit code (--- ) that allows
you to call and access your MFC from a remote location.
Remote Retrieval Access The ability to access your MFC remotely
from a touch tone phone.
Resolution The number of vertical and horizontal lines per inch.
See: Standard, Fine, Super Fine and Photo.
Ring Delay The number of rings before the MFC answers in
Fax Only
and
Fax/Tel
mode.
Ring Volume Volume setting for the MFC’s ring.
Scanning The process of sending an electronic image of a paper
document into your computer.