User Manual
Table Of Contents
- USER’S GUIDE MFC-5440CN/MFC-5840CN
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial Setup
- General Setup
- Setting the Mode Timer
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Turning on Automatic Daylight Savings Time
- Setting the LCD Contrast
- Setting the Tray Use for Copy mode (MFC-5840CN only)
- Setting the Tray Use for Fax mode (MFC-5840CN only)
- 3 Setup Send
- 4 Setup Receive
- 5 Quick-Dial numbers and dialing options
- 6 Remote Fax Options (Not available for color faxes)
- 7 Printing reports
- 8 Making copies
- 9 Walk-Up PhotoCapture Center™ (MFC-5840CN only)
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother USA/CAN
APPENDIX B B - 2
Navigation keys
You can access the menu mode by pressing
Menu/Set
.
When you enter the menu, the LCD scrolls.
Press
1
for General Setup menu
—OR—
Press
2
for Fax menu
—OR—
Press
3
for Copy menu
Press
0
for Initial Setup
You can scroll more quickly through each
menu level by pressing the arrow for the direction you want:
▲
or
▼
.
Select an option by pressing
Menu/Set
when that option appears on
the LCD.
The LCD will then show the next menu level.
Press
▲
or
▼
to scroll to your next menu selection.
Press
Menu/Set
.
When you finish setting an option, the LCD shows
Accepted
.
Access the menu
Go to the next menu level
Accept an option
Scroll through the current
menu level
Go back to the previous
menu level
Exit the menu
Select
▲▼
& Set
1.General Setup
Select
▲▼
& Set
2.Fax
Select
▲▼
& Set
3.Copy
....
Select
▲▼
& Set
0.Initial Setup