User Manual
Table Of Contents
- USER’S GUIDE MFC-5440CN/MFC-5840CN
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial Setup
- General Setup
- Setting the Mode Timer
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Turning on Automatic Daylight Savings Time
- Setting the LCD Contrast
- Setting the Tray Use for Copy mode (MFC-5840CN only)
- Setting the Tray Use for Fax mode (MFC-5840CN only)
- 3 Setup Send
- 4 Setup Receive
- 5 Quick-Dial numbers and dialing options
- 6 Remote Fax Options (Not available for color faxes)
- 7 Printing reports
- 8 Making copies
- 9 Walk-Up PhotoCapture Center™ (MFC-5840CN only)
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother USA/CAN
9 - 3 WALK-UP PHOTOCAPTURE CENTER
™
(MFC-5840CN ONLY)
Getting started
Firmly insert the card into the appropriate slot.
PhotoCapture
key lights:
■
PhotoCapture
light is ON, the media
card is inserted properly.
■
PhotoCapture
light is OFF, the media
card is not properly inserted.
■
PhotoCapture
light is BLINKING, the
media card is being read or written to.
The MFC can only read one media card at a time so do not insert
more than one card.
Do NOT unplug the power cord or remove the media card from
the media drive (slot) while the MFC is reading or writing to the
card (the
PhotoCapture
key is blinking). You will lose your
data or damage the card.
xD-Picture Card
™
SecureDigital
™
Memory Stick
®
CompactFlash
®
SmartMedia
®