User Manual
Table Of Contents
- USER’S GUIDE MFC-5440C/MFC-5840CN
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- 3 Setup Send
- How to enter Fax mode
- How to dial
- How to Fax (B&W and Colour)
- Basic sending operations
- Advanced sending operations
- Broadcasting (Not available for colour faxes)
- Overseas Mode
- Delayed Fax (Not available for colour faxes)
- Delayed Batch Transmission (Not available for colour faxes)
- Setup for Polled Transmit (Standard) (Not available for colour faxes)
- Setup for Polled Transmit with Secure Code (Not available for colour faxes)
- TX Lock (Key Lock for some countries)
- Faxing letter size documents from the scanner glass
- 4 Setup Receive
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options (Not available for colour faxes)
- 7 Printing reports
- 8 Making copies
- 9 Walk-Up PhotoCapture Center™ (MFC-5840CN only)
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your MFC
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
v
Quick Reference Guide
Sending faxes
Automatic Transmission
1
If it is not illuminated in
green, press (
Fax
).
2
Load your document.
3
Enter the fax number using
Speed-Dial, Search or the
dial pad.
4
Press
Mono Start
or
Colour Start
.
Storing numbers
Storing Speed-Dial numbers
1
Press
Menu/Set
,
2
,
3
,
1
.
2
Using the dial pad, enter a
two-digit Speed-Dial
location number, and then
press
Menu/Set
.
3
Enter a number (up to 20
digits), and then press
Menu/Set
.
4
Enter a name up to 15
characters (or leave it
blank), and then press
Menu/Set
.
5
Press
Stop/Exit
.
Dialling operations
Speed-Dialling
1
If it is not illuminated in
green, press (
Fax
).
2
Load your document.
3
Press
Search/Speed Dial
,
press
#
, and then press the
two-digit Speed-Dial
number.
4
Press
Mono Start
or
Colour Start
.
Using Search
1
If it is not illuminated in
green, press (
Fax
).
2
Load your document.
3
Press
Search/Speed Dial
,
and then enter the first letter
of the name you’re looking
for.
4
Press or to search the
memory.
5
Press
Mono Start
or
Colour Start
.
Making copies
1
Press
(
Copy
) to
illuminate it in green.
2
Load your document.
3
Press
Mono Start
or
Colour Start
.
▲
▲