User Manual
Table Of Contents
- USER’S GUIDE MFC-5440C/MFC-5840CN
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- 3 Setup Send
- How to enter Fax mode
- How to dial
- How to Fax (B&W and Colour)
- Basic sending operations
- Advanced sending operations
- Broadcasting (Not available for colour faxes)
- Overseas Mode
- Delayed Fax (Not available for colour faxes)
- Delayed Batch Transmission (Not available for colour faxes)
- Setup for Polled Transmit (Standard) (Not available for colour faxes)
- Setup for Polled Transmit with Secure Code (Not available for colour faxes)
- TX Lock (Key Lock for some countries)
- Faxing letter size documents from the scanner glass
- 4 Setup Receive
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options (Not available for colour faxes)
- 7 Printing reports
- 8 Making copies
- 9 Walk-Up PhotoCapture Center™ (MFC-5840CN only)
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your MFC
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
4 - 2 SETUP RECEIVE
To select or change your Receive Mode
1
Press
Menu/Set
,
0
,
1
.
2
Press
▲
or
▼
to select
Fax Only
,
Fax/Tel
,
External TAD
or
Manual
.
Press
Menu/Set
.
3
Press
Stop/Exit
.
Setting the Ring Delay
The Ring Delay sets the number of times the MFC rings before it
answers in
Fax Only
or
Fax/Tel
mode. If you have extension
phones on the same line as the MFC or subscribe to the telephone
company’s service, keep the Ring Delay setting of 4.
(See
Operation from extension telephones
on page A-14 and
Fax
Detect on page 4-4.)
1
If it is not illuminated in green, press (
Fax
).
2
Press
Menu/Set
,
2
,
1
,
1
.
3
Press
▲
or
▼
to select how many times the line rings before the
MFC answers (02 - 10 for Australia, 01 - 10 for New Zealand, 00
- 10 for some countries).
Press
Menu/Set
.
(If you select 00, the line won’t ring at all.)
4
Press
Stop/Exit
.
Current Receive Mode
Fax
: Fax Only
F/T
: Fax/Tel
TAD
: External TAD
Mnl
: Manual