User Manual

SETUP SEND 3 - 9
Real Time Transmission
When you are sending a fax, the MFC will scan the documents into
the memory before sending. Then, as soon as the phone line is free,
the MFC will start dialling and sending.
If the memory becomes full, the MFC will send the document in real
time (even if
Real Time TX
is set to
Off
).
Sometimes, you may want to send an important document
immediately, without waiting for memory transmission. You can set
Real Time TX
to
On
for all documents or for the next fax only.
If you want to fax multiple pages from the scanner glass, Real Time
Transmission should be set to
Off
.
1
If it is not illuminated in green, press (
Fax
).
2
Load your document.
3
Press
Menu/Set
,
2
,
2
,
5
.
4
To change the default setting, press
▲
or
▼
to select
On
(or
Off
).
Press
Menu/Set
.
—OR—
For the next fax transmission only, press
▲
or
▼
to select
Next Fax Only
.
Press
Menu/Set
and go to Step 5.
5
For the next fax only, press
▲
or
▼
to select
On
(or
Off
).
Press
Menu/Set
.
In Real Time Transmission, the redial feature does not work.
If you are sending a colour Fax, the MFC will send it in real time
(even if
Real Time TX
is set to
Off
).
Setup Send
5.Real Time TX