User Manual
Table Of Contents
- USER’S GUIDE MFC-5440C/MFC-5840CN
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- 3 Setup Send
- How to enter Fax mode
- How to dial
- How to Fax (B&W and Colour)
- Basic sending operations
- Advanced sending operations
- Broadcasting (Not available for colour faxes)
- Overseas Mode
- Delayed Fax (Not available for colour faxes)
- Delayed Batch Transmission (Not available for colour faxes)
- Setup for Polled Transmit (Standard) (Not available for colour faxes)
- Setup for Polled Transmit with Secure Code (Not available for colour faxes)
- TX Lock (Key Lock for some countries)
- Faxing letter size documents from the scanner glass
- 4 Setup Receive
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options (Not available for colour faxes)
- 7 Printing reports
- 8 Making copies
- 9 Walk-Up PhotoCapture Center™ (MFC-5840CN only)
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your MFC
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
3 - 2 SETUP SEND
Speed-Dialling
Press
Search/Speed Dial
,
#
, and then the two digit Speed-Dial
number. (See
Storing Speed-Dial numbers
on page 5-1.)
Search
You can search for names you have stored in the Speed-Dial
memories. Press
Search/Speed Dial
and the navigation keys to
search. (See
Storing Speed-Dial numbers
on page 5-1.)
* To search alphabetically, you can use the dial pad to enter the first
letter of the name you are looking for.
Fax Redial
If you are sending a fax manually and the line is busy, press
Redial/Pause
, and then press
Mono Start
or
Colour Start
to try
again. If you want to make a second call to the last number dialled,
you can save time by pressing
Redial/Pause
and
Mono Start
or
Colour Start
.
Redial/Pause
only works if you dialled from the control panel.
If you are sending a fax automatically
and the line is busy, the MFC
will automatically redial up to three times at five minutes intervals.
If the LCD shows
Not Registered
when you enter the
Speed-Dial number, a number has not been stored for it.
two-digit number
To search alphabetically*
To search numerically
or