User Manual
Table Of Contents
- USER’S GUIDE MFC-5440C/MFC-5840CN
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- 3 Setup Send
- How to enter Fax mode
- How to dial
- How to Fax (B&W and Colour)
- Basic sending operations
- Advanced sending operations
- Broadcasting (Not available for colour faxes)
- Overseas Mode
- Delayed Fax (Not available for colour faxes)
- Delayed Batch Transmission (Not available for colour faxes)
- Setup for Polled Transmit (Standard) (Not available for colour faxes)
- Setup for Polled Transmit with Secure Code (Not available for colour faxes)
- TX Lock (Key Lock for some countries)
- Faxing letter size documents from the scanner glass
- 4 Setup Receive
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options (Not available for colour faxes)
- 7 Printing reports
- 8 Making copies
- 9 Walk-Up PhotoCapture Center™ (MFC-5840CN only)
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your MFC
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
GETTING STARTED 2 - 8
Setting the LCD Contrast
You can adjust the LCD contrast for a sharper and more vivid
display. If you are having difficulty reading the LCD from your
position, try changing the contrast setting for improved viewing.
1
Press
Menu/Set
,
1
,
6
.
2
Press
▲
or
▼
to select
Light
or
Dark
.
Press
Menu/Set
.
3
Press
Stop/Exit
.
Setting the Tray Use for Copy mode
(MFC-5840CN only)
You can change the default tray that will be used for copying.
1
Press
Menu/Set
,
1
,
7
.
2
Press
▲
or
▼
to select
Tray#1 Only
,
Tray#2 Only
, or
Auto Select
.
Press
Menu/Set
.
3
Press
Stop/Exit
.
■
If both trays are set to the same size and type of paper,
Auto Select
will let your MFC take from Tray#1 first, then
take from Tray#2 if Tray#1 runs out of paper.
■
You can only use plain paper sizes Letter, Legal or A4 in
Tray#2.
General Setup
6.LCD Contrast
General Setup
7.Tray Use:Copy