User Manual
Table Of Contents
- USER’S GUIDE MFC-5440C/MFC-5840CN
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- 3 Setup Send
- How to enter Fax mode
- How to dial
- How to Fax (B&W and Colour)
- Basic sending operations
- Advanced sending operations
- Broadcasting (Not available for colour faxes)
- Overseas Mode
- Delayed Fax (Not available for colour faxes)
- Delayed Batch Transmission (Not available for colour faxes)
- Setup for Polled Transmit (Standard) (Not available for colour faxes)
- Setup for Polled Transmit with Secure Code (Not available for colour faxes)
- TX Lock (Key Lock for some countries)
- Faxing letter size documents from the scanner glass
- 4 Setup Receive
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options (Not available for colour faxes)
- 7 Printing reports
- 8 Making copies
- 9 Walk-Up PhotoCapture Center™ (MFC-5840CN only)
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your MFC
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
APPENDIX B B - 10
4
.
LAN
(MFC-5440CN)
5
.
LAN
(MFC-5840CN)
(Continued)
1
.
Setup
TCP/IP
(Continued)
6
.
WINS
Config
Auto
Static
You can choose the
WINS configuration
mode.
See
Network
User’s
Guide
on the
CD-ROM
7
.
WINS
Server
(Primary)
000.000.000.000
Specifies the IP
address of the
primary or secondary
server.
8
.
DNS Server
(Primary)
000.000.000.000
Specifies the IP
address of the
primary or secondary
server.
9
.
APIPA On
Off
Automatically
allocates the IP
address from the
link-local address
range.
2
.
Setup
Misc.
1
.
Ethernet Auto
100B-FD
100B-HD
10B-FD
10B-HD
Selects Ethernet link
mode.
2
.
Time Zone GMT+10:00
(Example for
Australia)
Sets the time zone
for your country.
0
.
Factory
Reset
— — Restore all network
settings to factory
default.
6
.
Print
Reports
(MFC-5840CN
only)
1
.
Help List
— — You can print these
lists and reports.
7-3
2
.
Quick-Dial
——
3
.
Fax
Journal
——
4
.
XMIT
Verify
——
5
.
User
Settings
——
6
.
Network
Config
——
Main Menu Submenu Menu
Selections
Options Descriptions Page
The factory settings are shown in Bold.