Operation Manual

Telephone and External devices
55
7
Using a cordless external
telephone 7
If your cordless telephone is connected to the
telephone line cord (See External and
extension telephones on page 53) and you
typically carry the cordless handset
elsewhere, it is easier to answer calls during
the Ring Delay.
If you let the machine answer first, you will
have to go to the machine so you can press
Tel/R to send the call to the cordless handset.
Using remote codes 7
Remote Activation code 7
If you answer a fax call on an extension or
external telephone, you can tell your machine
to receive it by dialling the Remote Activation
Code l 5 1. Wait for the chirping sounds then
replace the handset. (See Fax Detect
on page 40.) Your caller will have to press
Start to send the fax.
If you answer a fax call at the external
telephone, you can make the machine
receive the fax by pressing Mono Start.
Remote Deactivation code 7
If you receive a voice call and the machine is
in F/T mode, it will start to sound the F/T
(double) ring after the initial ring delay. If you
pick up the call on an extension telephone
you can turn the F/T ring off by pressing # 5 1
(make sure you press this between the rings).
If the machine answers a voice call and
pseudo/double rings for you to take over, you
can take the call at the external telephone by
pressing Tel/R.
Changing the remote codes 7
If you want to use Remote Activation, you
have to turn on the remote codes. The preset
Remote Activation Code is l 51. The preset
Remote Deactivation Code is #51. If you
want to, you can replace them with your own
codes.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose Remote Codes.
e Press d or cto choose On (or Off).
Press OK.
f Enter the new Remote Activation Code.
Press OK.
g Press a or b to choose Deact.Code:
and enter the new Remote Deactivation
Code.
Press OK.
h Press Stop/Exit.
Note
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Remote Activation Code and
Remote Deactivation Code to another
three-digit code using the numbers
0 - 9 , l , # .
• Remote Codes might not work with some
telephone systems.