User Manual

54
8
How to Dial 8
Manual dialling 8
Press all of the digits of the fax or telephone
number.
Speed Dialling 8
a Press (Speed Dial).
You can also choose Speed Dial by
pressing (Fax).
b Press a or b to choose Search.
Press OK.
c Press the two-digit Speed Dial number.
(See Storing Speed Dial numbers
on page 56.)
d If you have two numbers in the location,
press a or b to choose the number you
want to call.
Press OK.
Note
If the LCD shows Not Registered
when you enter or search a Speed Dial
number, a number has not been stored at
this location.
Search 8
You can search for names you have stored in
the Speed Dial memory.
a Press (Speed Dial).
You can also choose Speed Dial by
pressing (Fax).
b Press a or b to choose Search.
Press OK.
c Press a or b to choose
Alphabetical Order or
Numerical Order.
Press OK.
Note
•Press l to make the LCD font size larger.
•Press # to make the LCD font size smaller.
d If you chose Alphabetical Order in
step c, use the dial pad to enter the first
letter of the name, and then press a or b
to choose the name and number you
want to call.
Press OK.
Fax Redial 8
If you are sending a fax manually and the line
is busy, press Redial/Pause, and then press
Mono Start or Color Start to try again. If you
want to make a second call to a number you
recently dialled, you can press Redial/Pause
and choose one of the last 30 numbers from
the Outgoing Call List.
Redial/Pause only works if you dialled from
the control panel. If you are sending a fax
automatically and the line is busy, the
machine will automatically redial up to three
times at five minute intervals.
a Press Redial/Pause.
Dialling and storing numbers 8