User Manual

Sending a Fax
33
5
Additional sending
operations 5
Sending faxes using multiple
settings 5
When you send a fax you can choose any
combination of these settings: resolution,
contrast, scan size, overseas mode, delayed
fax timer, polling transmission and real time
transmission.
a Press (Fax).
The LCD shows:
b Press a or b to choose a setting you
want to change.
c Press d or c to choose an option.
d Go back to b to change more settings.
Note
• Most settings are temporary and the
machine returns to its default settings after
you send a fax.
• You can save some of the settings you
use most often by setting them as default.
These settings will stay until you change
them again. (See Setting your changes as
a new default on page 36.)
Contrast 5
If your document is very light or very dark, you
may want to change the contrast. For most
documents the factory setting Auto can be
used. It automatically chooses the suitable
contrast for your document.
Use Light when sending a light document.
Use Dark when sending a dark document.
a Press (Fax).
b Press a or b to choose Contrast.
c Press d or c to choose Auto, Light or
Dark.
Press OK.
Note
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting in any of the following conditions:
• When you send a color fax.
• When you choose Photo as the Fax
Resolution.
Fax Resolution Standard
Auto
Auto
Contrast
Contrast
FAX
Speed Dial
Speed Dial
Outgoing Call
Outgoing Call
Fax Press Start