User Manual

30
5
Entering Fax mode 5
When you want to send a fax, or change fax
send or receive settings, press the
(Fax) key to illuminate it in blue.
The LCD shows:
Press a or b to scroll through the Fax key
options. Some functions are only available
when sending monochrome faxes.
 Fax Resolution (See page 34.)
 Contrast (See page 33.)
 Speed Dial (See page 54.)
 Outgoing Call (See page 55.)
 Caller ID hist. (See page 55.)
 Broadcasting (See page 32.)
 Delayed Fax (See page 35.)
 Batch TX (See page 35.)
 Real Time TX (See page 34.)
 Polled TX (See page 65.)
 Polling RX (See page 63.)
 Overseas Mode (See page 35.)
 Glass ScanSize (See page 31.)
 Set New Default (See page 36.)
 Factory Reset (See page 36.)
When the option you want is highlighted,
press OK.
Faxing from the ADF 5
a Press (Fax).
b Place the document face down in the
ADF. (See Using the ADF on page 19.)
c Enter the fax number using the dial pad,
Speed Dial or Search.
d Press Mono Start or Color Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If you send a mono fax when the memory
is full it will be sent in real time.
Sending a Fax 5
Fax Resolution Standard
Auto
Auto
Contrast
Contrast
FAX
Speed Dial
Speed Dial
Outgoing Call
Outgoing Call
Fax Press Start