User Manual

72
11
How to copy 11
Entering Copy mode 11
When you want to make a copy, press
(Copy) to illuminate it in blue.
The LCD shows:
1 No. of Copies
You can enter the number of copies you want
by using the dial pad.
Press a or b to scroll through the Copy key
options.
 Quality (See page 73.)
 Enlarge/Reduce (See page 74.)
 Paper Type (See page 77.)
 Paper Size (See page 77.)
 Brightness (See page 76.)
 Contrast (See page 76.)
 Stack/Sort (See page 76.)
 Page Layout (See page 74.)
 Book Copy (See page 77.)
 Watermark Copy (See page 78.)
 Set New Default (See page 79.)
 Factory Reset (See page 79.)
When the option you want is highlighted,
press OK.
Note
• The default setting is Fax mode. You can
change the amount of time that the
machine stays in Copy mode after the last
copy operation. (See Mode Timer
on page 22.)
• Book Copy and Watermark Copy
features are supported by technology
from Reallusion, Inc.
Making a single copy 11
a Press (Copy).
b Load your document.
(See Loading documents on page 19.)
c Press Mono Start for B&W copy or
Colour Start for colour copy.
Making multiple copies 11
You can make up to 99 copies in one print run.
a Press (Copy).
b Load your document.
(See Loading documents on page 19.)
c Enter the number of copies you want.
d Press Mono Start for B&W copy or
Colour Start for colour copy.
Note
To sort the copies, press a or b to choose
Stack/Sort. (See Sorting copies using
the ADF on page 76.)
Stop copying 11
To stop copying, press Stop/Exit.
Making copies 11
01
1
COPY Copy Press Start
Normal
100%
100%
Enlarge/Reduce
Enlarge/Reduce
Plain Paper
Plain Paper
Paper
Paper
Type
ype
Ratio:
Ratio:
Quality