USER’S GUIDE MFC-3360C Version A
If you need to call Customer Service Please complete the following information for future reference: Model Number: MFC-3360C Serial Number: 1 Date of Purchase: Place of Purchase: 1 The serial number is on the back of the unit. Retain this User's Guide with your sales receipt as a permanent record of your purchase, in the event of theft, fire or warranty service. Register your product on-line at http://www.brother.
Approval Information and Compilation and Publication Notice THIS EQUIPMENT IS DESIGNED TO WORK WITH A TWO WIRE ANALOGUE PSTN LINE FITTED WITH THE APPROPRIATE CONNECTOR. APPROVAL INFORMATION Brother advises that this product may not function correctly in a country other than where it was originally purchased, and does not offer any warranty in the event that this product is used on public telecommunication lines in another country.
Table of Contents Section I 1 General General Information 2 Using the documentation .......................................................................................2 Symbols and conventions used in the documentation ....................................2 Accessing the Software User’s Guide ..................................................................2 Viewing Documentation ...................................................................................2 Control panel overview .............
Section II Fax 5 Sending a fax 22 Entering Fax mode ..............................................................................................22 Faxing from the ADF ....................................................................................22 Colour fax transmission ................................................................................. 22 Cancelling a fax in progress .......................................................................... 22 Broadcasting (Monochrome only).......
7 Telephone and External devices 33 Voice Operations ................................................................................................33 Making a telephone call .................................................................................33 Hold ...............................................................................................................33 Tone or pulse (Not available in New Zealand) ..............................................33 Fax/Tel mode .......................
9 Remote fax options 50 Fax Forwarding.................................................................................................... 50 Fax Storage ......................................................................................................... 50 Changing Remote Fax Options ...........................................................................51 Turning off Remote Fax Options ................................................................... 51 Remote Retrieval......................
Section IV Software 13 Software features 70 How to read the HTML User’s Guide ...................................................................70 Section V Appendixes A Safety and Legal 72 Choosing a location .............................................................................................72 To use the machine safely ...................................................................................73 IMPORTANT-For Your Safety ............................................................
C Menu and Features 103 On-screen programming.................................................................................... 103 Menu table ...................................................................................................103 Memory storage........................................................................................... 103 Menu keys ......................................................................................................... 104 Menu Table.....................
viii
Section I General General Information Loading documents and paper General setup Security features I 2 6 16 19
1 General Information Using the documentation 1 Thank you for buying a Brother machine! Reading the documentation will help you make the most of your machine. Symbols and conventions used in the documentation The following symbols and conventions are used throughout the documentation. Bold Bold typeface identifies specific keys on the machine’s control panel. Italics Italicized typeface emphasizes an important point or refers you to a related topic.
General Information c Viewing Documentation (For Macintosh®) If the language screen appears, click your language. The CD-ROM main menu will appear. 1 a Turn on your Macintosh ®. Insert the Brother CD-ROM into your CD-ROM drive. The following window will appear. b c d Double-click the Documentation icon. Note If this window does not appear, use Windows® Explorer to run the setup.exe program from the root directory of the Brother CD-ROM.
Chapter 1 Control panel overview 1 MFC-3360C 1 2 1 11 10 3 4 6 5 1 Power Save Lets you put the machine into Power Save mode. 2 LCD (liquid crystal display) Displays messages on the screen to help you set up and use your machine. 3 One-Touch keys Instantly accesses your stored Quick-Dial numbers. Shift When held down, lets you access One-Touch numbers 6 to 10. 4 4 Fax keys Redial/Pause Redials the last number called. It also inserts a pause when programming quick-dial numbers.
General Information 8 Menu keys: Menu Lets you access the menu to program your settings into the machine. a Search/Speed Dial Lets you look up and dial numbers that are stored in the memory. Volume keys 9 d c In Fax mode, you can press these keys to adjust the ring volume. d Press to scroll backward to a menu selection. a or b Press to scroll through the menus and options. Clear/Back Press to cancel the current setting, and go back to the previous menu.
2 Loading documents and paper Loading documents 2 You can send a fax, make copies, and scan from the ADF (automatic document feeder). Using the ADF Make sure documents written with ink are completely dry. a 2 1 The ADF can hold up to 20 pages and feeds each sheet individually. Use standard 80 g/m2 (20 lb) paper and always fan the pages before putting them in the ADF.
Loading documents and paper Scanning area 2 The scannable area depends on the settings in the application you are using. The figures below show the areas you cannot scan on paper. 3 Acceptable paper and other media 2 The print quality can be affected by the type of paper you are using in the machine. To get the best print quality for the settings you have chosen, always set the Paper Type to match the type of paper you load.
Chapter 2 Recommended media Improper Setup 2 To get the best print quality, we suggest using Brother paper. (See table below.) DO NOT use the following kinds of paper: • Damaged, curled, wrinkled, or irregularly shaped paper If Brother paper is not available in your country, we recommend testing various papers before purchasing large quantities. 1 We recommend using ‘3M Transparency Film’ when you print on transparencies.
Loading documents and paper Choosing the right media for the paper tray 2 Paper type and size for each operation Paper Type Paper Size 2 Fax Cut Sheet Cards Envelopes Transparencies 2 Usage Copy Printer Letter 216 × 279 mm (8 1/2 × 11 in.) Yes Yes Yes A4 210 × 297 mm (8.3 × 11.7 in.) Yes Yes Yes Legal 216 × 356 mm (8 1/2 × 14 in.) Yes Yes Yes Executive 184 × 267 mm (7 1/4 × 10 1/2 in.) – – Yes JIS B5 182 × 257 mm (7.2 × 10.1 in.) – – Yes A5 148 × 210 mm (5.8 × 8.3 in.
Chapter 2 Paper weight, thickness and capacity for paper tray 2 Paper Type Weight Thickness Cut Sheet Plain Paper 64 to 120 g/m2 (17 to 32 lb) 0.08 to 0.15 mm (0.003 to 0.006 in.) 100 1 Inkjet Paper 64 to 200 g/m2 (17 to 53 lb) 0.08 to 0.25 mm (0.003 to 0.01 in.) 20 Glossy Paper Up to 220 g/m2 (Up to 58 lb) Up to 0.25 mm (Up to 0.01 in.) 20 Photo Card Up to 240 g/m2 (Up to 64 lb) Up to 0.28 mm (Up to 0.01 in.) 20 Index Card Up to 120 g/m2 (Up to 32 lb) Up to 0.15 mm (Up to 0.006 in.
Loading documents and paper b Loading paper, envelopes and other media 2 Loading paper and other media a If you are using Letter, A4 or Legal size paper, press and hold the universal guide release button (1) as you slide out the front of the paper tray to match the paper size you are using. 1 2 Pull the paper tray completely out of the machine. If the paper support flap (1) is open, close it. Open the output paper tray cover (2).
Chapter 2 e Gently put the paper into the paper tray print side down and top edge first. Check that the paper is flat in the tray. f Gently adjust the paper side guides with both hands and the paper length guide to fit the paper. Make sure that the paper guides touch the edges of the paper. h Slowly push the paper tray completely into the machine. i While holding the paper tray in place, pull out the paper support (1) until it clicks and unfold the paper support flap (2).
Loading documents and paper Loading envelopes and post cards Loading envelopes How to load envelopes and post cards 2 a 2 Before loading, press the corners and sides of the envelopes or post cards to make them as flat as possible. 2 2 Use envelopes that weigh from 75 to 95 g/m2 (20 to 25 lb). Some envelopes need margin settings to be set in the application. Make sure you do a test print first. Note If the envelopes or post cards are ‘doublefeeding,’ put one envelope in the paper tray at a time.
Chapter 2 If you have problems when printing on envelopes, try the following suggestions: a b Open the envelope flap. c Adjust the size and margin in your application. Make sure the open flap is either to the side of the envelope or to the back edge of the envelope when printing. Removing small printouts from the machine When the machine ejects small paper onto the output paper tray, you may not be able to reach it.
Loading documents and paper Printable Area 2 The printable area depends on the settings in the application you are using. The figures below show the unprintable areas on cut sheet paper and envelopes. The machine can only print in the shaded areas when the Borderless print feature is available and turned on. Cut Sheet Paper Envelopes 3 3 4 1 4 1 2 2 Top (1) Bottom (2) Left (3) Right (4) Cut Sheet 3 mm (0.12 in.) 3 mm (0.12 in.) 3 mm (0.12 in.) 3 mm (0.12 in.) Envelopes 12 mm (0.47 in.
3 General setup Power Save mode 3 a b Note • You can retrieve faxes using Remote Retrieval if you are away from your machine. (See Remote Retrieval on page 51.) • If you have connected an external telephone or TAD, it is always available. a Press Menu, 1, 6. Press a or b to choose Fax Receive:On, or Fax Receive:Off. Press OK. Press Stop/Exit.
General setup Mode Timer 3 Paper Size You can use five sizes of paper for printing copies: Letter, Legal, A4, A5, and 10 × 15 cm (4” × 6” in.) and three sizes for printing faxes: Letter, Legal and A4. When you change the size of paper you load in the machine, you will need to change the paper size setting at the same time so your machine can fit an incoming fax on the page. The machine has three temporary mode keys on the control panel: Fax, Scan, and Copy.
Chapter 3 Beeper Volume 3 When the choose is on, the machine will beep when you press a key, make a mistake or after you send or receive a fax. c Press Menu, 1, 4, 2. Press a or b to choose Low, Med, High or Off Press OK. You can choose a range of speaker volume levels, from High to Off. a b c c Press Menu, 1, 5. Press a or b to select On or Off. Press OK. Press Stop/Exit. 3 LCD display Press Menu, 1, 4, 3. LCD Contrast Press a or b to choose Low, Med, High or Off. Press OK.
4 Security features TX Lock TX Lock lets you prevent unauthorized access to the machine. While TX Lock is On, the following operations are available: Receiving faxes 4 4 Setting and changing the TX Lock password 4 Setting up the password 4 Note Receiving calls • If you forget the TX Lock password, please call your Brother dealer for service. Fax Forwarding (If Fax Forwarding was already On.) • If you have already set the password, you will not need to set it again.
Chapter 4 Turning the TX Lock on/off Turning TX Lock on a b Press Menu, 2, 0, 1. c Enter the registered 4-digit password. Press OK. The machine goes offline and the LCD shows TX Lock Mode. Press Menu. Enter the registered 4-digit password. Press OK. TX lock is automatically turned off. Note If you enter the wrong password, the LCD shows Wrong Password and stays offline. The machine will stay in TX Lock mode until the registered password is entered. 20 4 Press a or b to choose Set TX Lock.
Section II Fax Sending a fax Receiving a Fax Telephone and External devices Dialling and storing numbers Remote fax options Printing Reports Polling II 22 28 33 46 50 55 57
5 Sending a fax Entering Fax mode To enter fax mode, press the key will glow green. 5 (Fax), and Faxing from the ADF 5 a Make sure you are in Fax mode b c d Put the document face down in the ADF. . Dial the fax number. Press Mono Start or Colour Start. The machine starts scanning the document. Note 5 Broadcasting (Monochrome only) Broadcasting is when the same fax message is automatically sent to more than one fax number.
Sending a fax Additional sending operations • If the memory is full, press Stop/Exit to stop the job. If more than one page has been scanned, press Mono Start to send the portion that is in the memory. Cancelling a Broadcast in progress a Press Menu, 2, 6. The LCD will show the fax number being dialled. b Press OK. The LCD will show the job number: XXXXXXXXX 1.
Chapter 5 Contrast 5 If your document is very light or very dark, you may want to change the contrast. For most documents the default setting Auto can be used. It automatically chooses the suitable contrast for your document. Use Light when sending a light document. Use Dark when sending a dark document. a Make sure you are in Fax mode b c d Load your document. To change the default fax resolution a Make sure you are in Fax mode b c Press Menu, 2, 2, 2. .
Sending a fax Dual access (Monochrome only) Sending in real time for all faxes 5 You can dial a number and start scanning the fax into memory—even when the machine is sending from memory, receiving faxes or printing PC data. The LCD shows the new job number and available memory. a Make sure you are in Fax mode b Press Menu, 2, 2, 5. Realtime TX:On c Note If the Out of Memory message appears while scanning documents, press Stop/Exit to cancel or Mono Start to send the pages scanned so far.
Chapter 5 Delayed Faxing (Monochrome only) 5 During the day you can store up to 50 faxes in the memory to be sent within 24-hours. These faxes will be sent at the time of day you enter in step d. a Make sure you are in Fax mode b c Load your document. . Press Menu, 2, 2, 3. 3.Delayed Fax d Do one of the following: Press OK to accept the displayed time. Enter the time you want the fax to be sent (in 24-hour format). (For example, enter 19:45 for 7:45 PM.) Press OK. 1.Doc 2.
Sending a fax Sending a fax manually 5 Manual transmission lets you hear the dialling, ringing and fax-receiving tones while sending a fax. a Make sure you are in Fax mode b c Load your document. Dial the fax number you want to call. f Replace the handset. 5 If you get an Out of Memory message while scanning the first page of a fax, press Stop/Exit to cancel the fax.
6 Receiving a Fax 6 Receive modes 6 You must choose a receive mode depending on the external devices and telephone services you have on your line. Choosing the Receive Mode 6 By default, your machine will automatically receive any faxes that are sent to it. The diagram below will help you choose the correct mode. For more detailed information on the receive modes. See page 29.
Receiving a Fax Using receive modes 6 Faxes will be automatically received. 6 Voice callers can record a message on the external TAD. For more information see Connecting an external TAD (telephone answering device) on page 42. Fax only mode will automatically answer every call. If the call is a fax your machine will receive it. Fax/Tel 6 External TAD mode lets an external answering device manage your incoming calls.
Chapter 6 Receive mode settings Ring Delay The Ring Delay sets the number of times the machine rings before it answers in Fax Only or Fax/Tel mode. a b c Press Menu, 2, 1, 1. Press a or b to choose how many times the line rings before the machine answers (02-10 for Australia, 01-10 for New Zealand, 0-10 for some countries). Press OK. If you choose 00, the line will not ring at all.
Receiving a Fax Fax Detect If Fax Detect is On (default setting): 6 Printing a reduced incoming fax When you hear a fax tone through the handset, you have to press Mono Start or Colour Start on the machine. If you are not at your machine, press l 5 1 (l 9 1 for New Zealand) on the extension phone. (See Operation from extension telephones on page 44.) 6 The machine automatically reduces each page of an incoming fax to fit on one page of A4, Letter or Legal size paper with Auto Reduction on.
Chapter 6 Receiving faxes into memory 6 As soon as the paper tray becomes empty during fax reception, the screen will display No Paper Fed, asking you to put paper in the paper tray. (See Loading paper and other media on page 11.) If you are unable to put paper in the paper tray the following will happen: If Memory Receive is On: The machine will carry on receiving the fax, with the remaining pages being stored in memory, if enough memory is available.
7 Telephone and External devices Voice Operations 7 If you are at the machine, you can lift the handset to answer. 7 a b To start a voice call, pick up the handset. c To hang up, replace the handset. When you hear the dial tone, enter a number using the dial pad, One Touch, Speed-Dial and Search. Hold If you have a Pulse dialing service, but need to send Tone signals (for example, for telephone banking), follow the instructions below: a Pick up the handset or press Hook/Hold.
Chapter 7 Do you have Voice Mail? 7 If you have Voice Mail on the phone line that you will install your new machine on, there is a strong possibility that Voice Mail and the machine will conflict with each other while receiving incoming calls. However, the Distinctive Ring feature allows you to use more than one number on your line, so both Voice Mail and the machine can work together without any problems. If each one has a separate phone number, neither will interfere with the other’s operations.
Telephone and External devices How does Telstra® FaxStream® Duet® Work? Incoming calls to the voice number, will have the standard ring pattern of long, long tone, followed by a pause, repeated, while the new fax number will have a different ring pattern of three short bursts of ring, repeated at regular intervals. When FaxStream® Duet® is On and you receive a voice call all extension and external phones will ring with a standard ring pattern.
Chapter 7 Caller ID 7 Caller ID is a telephone service that allows the subscriber to see a display of the caller’s phone number or name as the telephone rings. It is a fast way to screen your calls. You can respond quickly to calls you missed, because Caller IDs are received and stored in your machine memory. The Caller ID Appears on the Display When Your Telephone Rings Note At Home Residential customers can protect themselves from unwanted calls.
Telephone and External devices Viewing Caller ID List a 7 Press Menu, 2, 0, 4. 0.Miscellaneous Press a or b to choose Display#. Press OK. The Caller ID of the last call will appear on the display. If no ID is stored, the beeper will sound and No Caller ID will appear on the display. c Press a or b to scroll through the Caller ID memory to choose the Caller ID you want to view. Press OK. The LCD shows the caller's number, the date, and time of the call.
Chapter 7 How Does FaxAbility Work? Your telephone number will have the standard ring pattern of long, long tone, while the new number will have a ring pattern of long, silence, long, etc. When FaxAbility is On, you will not hear the first ring of all incoming calls on the fax machine. Extension phones will ring as usual. If the fax machine recognizes the ring pattern, all ringing will stop and the fax machine will answer and automatically receive the fax message.
Telephone and External devices Advantages of Caller ID 7 For Business Viewing Caller ID List Your machine stores information for the last thirty calls in the Caller ID list. You can view or print this list. When the thirty-first call comes in to the machine, it replaces information about the first call. All businesses profit from a quicker response to customer calls.
Chapter 7 d When the printing has finished, press Stop/Exit. Note If you use the Caller ID for Dial back; • Please be sure that you use appropriate dialling procedures for local and national call. • Please be sure that you make sure of the details of the exact number to be called back, and the need to insert prefix(es) for manual dialling. • Please understand that your machine may not display precisely the digits to be called.
Telephone and External devices Registering the Distinctive Ring pattern 7 Caller ID (For Singapore and Hong Kong) 7 Very Important! The Caller ID feature of this machine lets you use the Caller ID subscriber service offered by many local phone companies. Call your telephone company for details. This service provides you, by means of the screen display, the telephone number (or name) of your caller as the line rings. (See Printing Caller ID List on page 42.
Chapter 7 Viewing Caller ID List 7 Your machine stores information for the last thirty calls in the Caller ID list. You can view or print this list. When the thirty-first call comes in to the machine, it replaces information about the first call. a You may choose to connect an external answering device. However, when you have an external TAD on the same telephone line as the machine, the TAD answers all calls and the machine ‘listens’ for fax calling (CNG) tones.
Telephone and External devices Note Improper Setup Do not connect a TAD elsewhere on the same phone line. Connections 7 The external TAD must be connected as shown in the previous illustration. a Multi-Line connections (PABX) Set your external TAD to one or two rings. (The machine's Ring Delay setting does not apply.) b Record the outgoing message on your external TAD. c d Set the TAD to answer calls. Timing is important in recording this message.
Chapter 7 External and extension phones Connecting an external or extension telephone 7 If the machine answers a voice call and pseudo/double-rings for you to take over, use the Telephone Answer Code # 5 1 (# 9 1 for New Zealand) to take the call at an extension phone. (See F/T Ring Time (Fax/Tel mode only) on page 30.) 7 You can connect a separate telephone to your machine as shown in the diagram below.
Telephone and External devices Changing the remote codes 7 If you want to use Remote Activation, you have to turn on the remote codes. (The default setting is On) The preset Fax Receive Code is l 5 1 (l 9 1 for New Zealand). The preset Telephone Answer Code is # 5 1 (# 9 1 for New Zealand). If you want to, you can replace them with your own codes. a Press Menu, 2, 1, 4. 1.Setup Receive 4.Remote Codes b Press a or b to choose On (or Off). Press OK. c Enter the new Fax Receive Code. Press OK.
8 Dialling and storing numbers How to Dial Manual dialling 8 a 8 Press all of the digits of the fax number. One-Touch Dialling Press Search/Speed Dial, the # (hash) key, and then the two digit Speed-Dial number. 8 Press the One-Touch key that stores the number you want to call. To dial One-Touch numbers 6 to 10, hold down Shift as you press the One-Touch key.
Dialling and storing numbers Search 8 You can search for names you have stored in the One-Touch and Speed-Dial memories. Press Search/Speed Dial and the menu keys to search numerically or use the dial pad and then the menu keys to search alphabetically. Fax Redial 8 If you are sending a fax manually and the line is busy, press Redial/Pause, and then press Mono Start or Colour Start to try again.
Chapter 8 Storing One-Touch Dial numbers d Enter the name (up to 16 characters) using the dial pad. 8 Your machine has 5 One-Touch keys where you can store 10 fax or phone numbers for automatic dialling. To access numbers 6 to 10, hold down Shift as you press the One-Touch key. a b Press Menu, 2, 3, 1. c Enter the number (up to 20 digits). Press OK. d Do one of the following: Press OK. (To help you enter letters, see Entering Text on page 112.) To store the number without a name, press OK.
Dialling and storing numbers Setting up Groups for broadcasting If you regularly want to send the same fax message to many fax numbers you can set up a Group. Groups are stored on a One-Touch key or a Speed-Dial number. Each group uses up a One-Touch key or a Speed-Dial location. You can then send the fax message to all the numbers stored in a Group just by pressing a One-Touch key or entering a Speed-Dial number, and then pressing Mono Start.
9 Remote fax options Remote fax options are not available for colour fax. Fax Storage You can only use one remote fax option at a time. The fax storage feature lets you store your received faxes in the machine’s memory. You can retrieve stored fax messages from a fax machine at another location using the remote retrieval commands. (See Retrieving fax messages on page 52.) Your machine will automatically print a copy of the stored fax.
Remote fax options Changing Remote Fax Options Remote Retrieval 9 If received faxes are left in your machine's memory when you change the remote fax options, the LCD will ask you one of the following messages: Print All Fax? 1.Yes 2.No If you press 1, faxes in the memory will be erased or printed before the setting changes. If a backup copy has already been printed it will not be printed again. a 1.Forward/Store b Press a or b to choose Off. Press OK. c Press Stop/Exit.
Chapter 9 Using your Remote Access Code a Dial your fax number from a telephone or another fax machine using touch tone. b When your machine answers, enter your remote access code (3 digits followed by l during a period of silence). c The machine signals if it has received messages: Retrieving fax messages 9 a b Dial your fax number. c When you hear two short beeps, press 9 6 2.
Remote fax options Changing your Fax Forwarding number 9 You can change the default setting of your fax forwarding number from another telephone or fax machine using touch tone. a b Dial your fax number. c When you hear two short beeps, press 9 5 4. d Wait for the long beep, and then use the dial pad to enter the new number (up to 20 digits) of the remote fax machine where you want your fax messages forwarded followed by # #.
Chapter 9 Remote fax commands Follow the commands below to access features when you are away from the machine. When you call the machine and enter your remote access code (3 digits followed by l), the system will give two short beeps and you must enter a remote command. Remote commands 95 Change the Fax Forwarding or Fax Storage settings 1 OFF You can choose Off after you have retrieved or erased all your messages. 2 Fax Forwarding If you hear one long beep, the change has been accepted.
10 Printing Reports Fax reports 10 Fax Journal (activity report) 10 You can use the Transmission Report as proof that you sent a fax. This report lists the time and date of transmission and whether the transmission was successful (OK). If you choose On or On+Image, the report will print for every fax you send. a b Press Menu, 2, 4, 1. Every 50 Faxes Press a or b to choose Off+Image, On, On+Image or Off. Press OK. Press Stop/Exit. Press a or b to choose an interval. Press OK.
Chapter 10 Reports 10 The following reports are available: 1.XMIT Verify Prints a Transmission Verification Report for your last transmission. 2.Help List A help list about how to quickly program your machine. 3.Quick-Dial Lists names and numbers stored in the One-Touch and Speed-Dial memory, in numerical order and shows any groups set up. 4.Fax Journal Lists information about the last incoming and outgoing faxes. (TX: Transmit.) (RX: Receive.) 5.User Settings Lists your settings.
11 Polling 11 Polling lets you set up your machine so other people can receive faxes from you, but they pay for the call. It also lets you call somebody else’s fax machine and receive a fax from it, so you pay for the call. The polling feature needs to be set up on both machines for this to work. Not all fax machines support polling. Polling receive 11 Polling receive lets you call another fax machine to receive a fax.
Chapter 11 Setup for delayed polling receive Sequential polling 11 Delayed polling lets you set the machine to begin polling receive at a later time. You can only set up one delayed polling operation. a Make sure you are in Fax mode b Press Menu, 2, 1, 7. . 7.Polling RX c d e f Press a or b to choose Timer. Press OK. The machine can request documents from several fax machines in one operation. a Make sure you are in Fax mode b Press Menu, 2, 1, 7. . 7.
Polling Polled transmit (Monochrome only) Setup for polled transmit with secure code Secure Polling restricts who can retrieve the documents you set up to be polled. Polled Transmit is when you set up your machine to wait with a document so another fax machine can call and retrieve it. Setup for polled transmit a Make sure you are in Fax mode b c Load your document. Press Menu, 2, 2, 6. 11 . Secure Polling only works with Brother fax machines.
Chapter 11 60
Section III Copy Making copies III 62
12 Making copies How to copy 12 Entering Copy mode 12 Press (Copy) to enter Copy mode. The default setting is Fax Mode. You can change the number of seconds or minutes that the machine stays in Copy mode. (See Mode Timer on page 17.) 12 Making multiple copies a Make sure you are in Copy mode b c Load your document. d Press Mono Start or Colour Start. 12 . Use the dial pad to enter the number of copies (up to 99). Note To sort your copies, press Copy Options.
Making copies Copy options 12 When you want to quickly change the copy settings temporarily for the next copy, use the Copy Options. Press Menu selection/ Quality Options Page Normal 64 Fast Best The machine returns to its default settings 30 seconds after it finishes copying, or if the mode timer returns the machine to Fax mode. For more information see Mode Timer on page 17.
Chapter 12 Changing copy speed and quality To change the default setting, follow the instructions below: 12 a You can choose from a range of quality settings. The default setting is Normal. 1.Quality To temporarily change the quality setting, follow the instructions below: Press and a or b to choose Quality Normal Fast Best a b c Normal is the recommended mode for ordinary printouts. This produces good copy quality with good copy speed. Press a or b to choose Normal, Fast or Best. Press OK.
Making copies e Choose one of the options below: e Press 2 in 4 in Press f Press Mono Start to scan the document. Use a or b to choose the enlargement or reduction ratio you want. Press OK. Use a or b to choose Custom(25-400%). Press OK. Use the dial pad to enter an enlargement or reduction ratio from 25% to 400%. (For example, press 5 3 to enter 53%.) Press OK. f Press Mono Start or Colour Start.
Chapter 12 Sorting copies using the ADF (Monochrome only) To change the default setting follow the instructions below: 12 a b You can sort multiple copies. Pages will be stacked in the order 1 2 3, 1 2 3, 1 2 3, and so on. c Press Menu, 3, 2. Press a or b to make the copy lighter or darker. Press OK. Press Stop/Exit. a Make sure you are in Copy mode b c Load your document. Contrast Use the dial pad to enter the number of copies (up to 99).
Making copies Paper options 12 Paper type 12 If you are copying on special paper, be sure to select the type of paper you are using so you will get the best print quality. Paper size 12 If copying on paper other than A4 size, you will need to change the paper size setting. You can copy on Letter, Legal, A4, A5 or Photo Card 10(W) × 15(H)cm paper. a Make sure you are in Copy mode Load your document. . a Make sure you are in Copy mode b c Load your document.
Chapter 12 68
Section IV Software Software features IV 70
13 Software features c The CD-ROM includes the Software User’s Guide for features available when connected to a computer (for example, printing and scanning). The guide has easy to use links that, when clicked, will take you directly to a particular section. 13 Click the heading you would like to read from the list at the left of the window.
Section V Appendixes Safety and Legal Troubleshooting and Routine Maintenance Menu and Features Specifications Glossary V 72 83 103 113 121
A Safety and Legal Choosing a location Put your machine on a flat, stable surface that is free of vibration and shocks, such as a desk. Put the machine near a telephone socket and a standard grounded electrical socket. Choose a location where the temperature remains between 10° and 35° C (50° F and 95° F). CAUTION • Avoid placing your machine in a high-traffic area. • Avoid placing your machine on a carpet.
Safety and Legal To use the machine safely A Please keep these instructions for later reference and read them before attempting any maintenance. WARNING There are high voltage electrodes inside the machine. Before you clean the inside of the machine, make sure you have unplugged the telephone line cord first and then the power cord from the electrical socket. Doing this will prevent an electrical shock. DO NOT handle the plug with wet hands. Doing this may cause an electrical shock.
DO NOT put your hands on the edge of the machine under the panel cover or touch the document feed rollers. Doing this may cause injury. DO NOT put your hands on the edge of the paper tray under the output paper tray cover. Doing this may cause injury. DO NOT touch the paper feed roller. Doing this may cause injury.
Safety and Legal DO NOT touch the area shaded in the illustration. Doing this may cause injury. When moving the machine you must lift it from the base, by placing a hand at each side of the unit as shown in the illustration. If the machine becomes hot, releases smoke or generates any strong smells, immediately unplug the machine from the electrical socket. Call your Brother dealer. If metal objects, water or other liquids get inside the machine, immediately unplug the machine from the electrical socket.
WARNING • Use caution when installing or modifying telephone lines. Never touch telephone wires or terminals that are not insulated unless the telephone line has been unplugged at the wall socket. Never install telephone wiring during a lightning storm. Never install a telephone wall socket in a wet location. • This product must be installed near an electrical socket that is easily accessible.
Safety and Legal Important Information for Australia A Important safety instructions A 1 Read all of these instructions. 2 Save them for later reference. 3 Follow all warnings and instructions marked on the product. 4 Unplug this product from the wall socket before cleaning the outside of the machine and the scanner glass. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 5 Do not use this product near water. 6 Do not place this product on an unstable cart, stand, or table.
If the product has been exposed to rain or water. If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. If the product has been dropped or the cabinet has been damaged.
Safety and Legal 13 Do not place this product on an unstable surface, stand, or table. The product may fall, causing serious damage to the product. 14 Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface.
25 Note that some telephones are not compatible with this unit and dialling errors may result if the two devices are used together in other than quiet conditions. The Telecom Faults Service is not to be called should such problems arise. In such cases, it is recommended that the prefix and wanted number are dialled manually. 26 This equipment may not provide for the effective hand-over of a call to another device connected to the same line.
Safety and Legal 14 Never push objects of any kind into this product through cabinet slots, since they may touch dangerous voltage points or short out parts resulting in the risk of fire or electric shock. Never spill liquid of any kind on the product. 15 Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points and/or other risks, and may void your warranty. Please refer all servicing to our Authorized Service Personnel.
Legal limitations for copying A It is an offence to make reproductions of certain items or documents with the intent to commit fraud. This memorandum is intended to be a guide rather than a complete list. We suggest you check with relevant legal authorities if in doubt about a particular item or document. Money Bonds or other certificates of indebtedness Certificates of Deposit Armed Forces Service or Draft papers.
B Troubleshooting and Routine Maintenance B Troubleshooting B If you think there is a problem with your machine, check the chart below and follow the troubleshooting tips. Most problems can be easily resolved by yourself. If you need additional help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at http://solutions.brother.com.
Printing (Continued) Difficulty Suggestions Printed text or images are skewed. Make sure the paper is loaded properly in the paper tray and the paper side guide is adjusted correctly. (See Loading paper and other media on page 11.) Make sure the Lower Jam Clear Cover is set properly. Smudged stain at the top centre of the printed page. Make sure the paper is not too thick or curled. (See Acceptable paper and other media on page 7.) Printing appears dirty or ink seems to run.
Troubleshooting and Routine Maintenance Printing Received Faxes Difficulty Suggestions Condensed print and white streaks across the page or the top and bottom of sentences are cut off. You probably had a bad connection, with static or interference on the telephone line. Ask the other party to send the fax again. Vertical black lines when receiving. The sender's scanner may be dirty. Ask the sender to make a copy to see if the problem is with the sending machine. Try receiving from another fax machine.
Sending Faxes Difficulty Suggestions Cannot send a fax Check all line cord connections. Make sure that the Fax key is illuminated. (See Entering Fax mode on page 22.) Ask the other party to check that the receiving machine has paper. Print the Transmission Verification Report and check for an error. (See Reports on page 56.) Make sure the panel cover is completely closed. Transmission Verification Report says ‘Result:NG’ or ‘Result:ERROR’. There is probably temporary noise or static on the line.
Troubleshooting and Routine Maintenance Menu Setting Difficulty Difficulty Suggestions The machine beeps when you try to access the Setup Receive menu. If the Fax key is not illuminated, press it to turn on Fax mode. The Setup Receive setting is available only when the machine is in Fax mode. Copying Difficulty Difficulty Cannot make a copy Suggestions Make sure that the Copy key is illuminated. (See Entering Copy mode on page 62.) Make sure the panel cover is completely closed.
Error messages B As with any sophisticated office product, errors may occur. If this happens, your machine identifies the error and shows an error message. The most common error messages are shown below. You can correct most errors by yourself. If you need more help, the Brother Solutions Center offers latest FAQs and troubleshooting tips. Visit us at http://solutions.brother.com. Error Message Cause Action Change Unable XX The machine has a mechanical problem.
Troubleshooting and Routine Maintenance Error Message Cause Action Ink Empty One or more of the ink cartridges is empty. The machine will stop all print operations. While memory is available, black and white faxes will be stored in the memory. If a sending machine has a colour fax, the machine's ‘handshake’ will ask that the fax be sent as black and white. If the sending machine has the ability to convert it, the colour fax will be stored in the memory as a black and white fax.
Error Message Cause Action Out of Memory The machine's memory is full. Fax sending or copy operation in progress Press Stop/Exit and wait until the other operations in progress finish and then try again. Clear the data in the memory. To gain extra memory, you can turn off Fax Storage. (See Turning off Remote Fax Options on page 51.) Print the faxes that are in the memory. (See Printing a fax from the memory on page 32.) Printing operation in progress Reduce print resolution.
Troubleshooting and Routine Maintenance Transferring Fax Journal report to another fax machine B If you have not set up your Station ID, you cannot enter fax transfer mode. a b Press Menu 9, 0, 2. c Press Mono Start. Enter the fax number to which Fax Journal report will be forwarded. Changing LCD language Document is jammed inside the panel cover a Take out any paper from the ADF that is not jammed. b c Open the panel cover. d e Close the panel cover. B Pull the jammed document out.
b Pull out the jammed paper (1). d Put the Lower Jam Clear Cover back on. Make sure the cover is set properly. e Open the Upper Jam Clear Cover (1). Make sure that there is no jammed paper left in the corners of the machine. 1 If you cannot remove the jammed paper from the front side, or the error message still appears on the LCD after you remove the jammed paper, please go to the next step. c Remove the Lower Jam Clear Cover (1) from the back of the machine.
Troubleshooting and Routine Maintenance f Compatibility Close the Upper Jam Clear Cover. B If you are having problems sending or receiving a fax due to possible interference on the phone line, we recommend that you adjust the Equalization for compatibility to reduce the modem speed for fax operations. a b g When you send a fax automatically, by default your machine will wait for a fixed amount of time before it starts to dial the number.
Routine maintenance Replacing the ink cartridges B B Your machine is equipped with an ink sensor. The ink sensor automatically monitors the level of ink in each of the 4 cartridges. When the machine detects an ink cartridge is running out of ink, the machine will tell you with a message on the LCD. The LCD will tell you which ink cartridge is low or needs replacing. Be sure to follow the LCD prompts to replace the ink cartridges in the correct order.
Troubleshooting and Routine Maintenance e Each colour has its own correct position. Insert the ink cartridge in the direction of the arrow on the label. M f WARNING If ink gets in your eyes, wash them out with water at once and call a doctor if you are concerned. brother XXXX Lift the lock release lever and gently push it until it clicks, and then close the ink cartridge cover. CAUTION DO NOT take out ink cartridges if you do not need to replace them.
Brother multifunction machines are designed to work with ink of a particular specification and will work to a level of optimum performance when used with genuine Brother Branded ink cartridges. Brother cannot guarantee this optimum performance if ink or ink cartridges of other specifications are used.
Troubleshooting and Routine Maintenance d Cleaning the machine printer platen Lift the output paper tray cover and wipe the inside and outside of the paper tray with a soft cloth to remove dust. B WARNING Unplug the machine from the AC power outlet before cleaning the printer platen (1). a e Close the output paper tray cover and put the paper tray firmly back in the machine.
Cleaning the paper pick-up roller a Pull the paper tray completely out of the machine. b Unplug the machine from the electrical socket and remove the Lower Jam Clear Cover (1). Cleaning the print head B To ensure good print quality, the machine will regularly clean the print head. You can start the cleaning process manually if needed. Clean the print head and ink cartridges if you get a horizontal line in the text or graphics on your printed pages.
Troubleshooting and Routine Maintenance Checking the print quality B h If faded or streaked colours and text appear on your output, some of the nozzles may be clogged. You can check this by printing the Print Quality Check Sheet and looking at the nozzle check pattern. a b c Press a or b to choose Print Quality. Press OK. d Press Colour Start. The machine begins printing the Print Quality Check Sheet. e Check the quality of the four colour blocks on the sheet. Is Quality OK? 1.Yes 2.
Checking the printing alignment You may need to adjust the printing alignment after transporting the machine if your printed text becomes blurred or images become faded. a b c d Checking the ink volume B You can check the ink that is left in the cartridge. a b Press Ink Management. Press a or b to choose Test Print. Press OK. Press a or b to choose Alignment. Press OK. Press Mono Start or Colour Start. The machine starts printing the Alignment Check Sheet.
Troubleshooting and Routine Maintenance Packing and shipping the machine When you transport the machine, use the packing materials that came with your machine. If you do not pack the machine properly, you could void your warranty. CAUTION It is important to allow the machine to ‘park’ the print head after a print job. Listen carefully to the machine before unplugging it to make sure that all mechanical noise has stopped.
i Pack the printed materials, and additional parts (handset, cords and CD) in the original carton as shown below. Do NOT pack the used ink cartridges in the carton. j Close the carton and tape it shut.
C Menu and Features On-screen programming C Memory storage C Your machine is designed to be easy to use with LCD on-screen programming using the menu keys. User-friendly programming helps you take full advantage of all the menu selections your machine has to offer. C Even if there is a power failure, you will not lose your menu settings because they are stored permanently. Temporary settings (such as Contrast, Overseas mode, and so on) will be lost. You may have to reset the date and time.
Menu keys To access the menu mode: C a b Press Menu. Choose an option. Press 1 for General Setup menu. Press 2 for Fax menu. Press 3 for Copy menu. Access the menu Press 0 for Initial Setup. Go to the next menu level You can scroll more quickly through each menu level by pressing a or b for the direction you want. Accept an option Go back to the previous menu level. Delete an incorrect letter when you need to enter text into the machine. Scroll through the current menu level.
Menu and Features Menu Table C The menu table will help you understand the menu selections and options that are found in the machine's programs. The factory settings are shown in Bold with an asterisk. Choose & OK Choose & OK to accept to exit Main Menu Submenu Menu Selections Options Descriptions Page 1.General Setup 1.Mode Timer — 0 Sec Sets the time to return to Fax mode. 17 Sets the type of paper in the paper tray. 17 Sets the size of the paper in the paper tray.
Main Menu Submenu Menu Selections Options Descriptions Page 1.General Setup 4.Volume 1.Ring Off Adjusts the ring volume. 17 Adjusts the volume level of the beeper. 18 Adjusts the speaker volume. 18 Changes for Daylight Savings Time manually. 18 Customizes the Power Save key not to receive faxes in power save mode. 16 Adjusts the contrast of the LCD. See Quick Setup Guide Low (Continued) Med* High 2.Beeper Off Low* Med High 3.Speaker Off Low Med* High 5.
Menu and Features Main Menu Submenu Menu Selections Options Descriptions Page 2.Fax 1.Setup Receive 1.Ring Delay (Example for Australia) Sets the number of rings before the machine answers in Fax Only or Fax/Tel mode. 30 Sets the pseudo/doublering time in Fax/Tel mode. 30 Receives fax messages without pressing Start. 31 (In Fax mode only) 02* 03 04 05 06 07 08 09 10 2.F/T Ring Time 20 Sec 30 Sec* 40 Sec 70 Sec (For New Zealand) 20 Sec 30 Sec* 40 Sec 55 Sec 3.
Main Menu Submenu Menu Selections Options Descriptions Page 2.Fax 1.Setup Receive 4.Remote Codes On* (l51, #51) 44 (Continued) (Continued) Allows you to answer all calls at an extension or external phone and use codes to turn the machine on or off. You can personalize these codes. Cuts the size of incoming faxes. 31 Automatically stores any incoming faxes in its memory if it runs out of paper. 32 Sets up your machine to poll another fax machine.
Menu and Features Main Menu Submenu Menu Selections Options Descriptions Page 2.Fax 3.Set QuickDial 1.One-Touch Dial — Stores One-Touch Dial numbers, so you can dial by pressing only a few keys (and Start). 46 2.Speed-Dial — Stores Speed-Dial numbers, so you can dial by pressing only a few keys (and Start). 48 3.Setup Groups — Sets up a Group number for Broadcasting. 49 1.Transmission On Sets initial setup for Transmission Verification Report and Fax Journal. 56 (Continued) 4.
Main Menu Submenu Menu Selections Options Descriptions Page 2.Fax 0.Miscellaneous 3.Faxability On 38 (Continued) (Continued) (For New Zealand only) Off* If you have FaxAbility from Telecom, you can use this function to store the ringing pattern of your fax number. And if you set in to ON, you should use the registered number only. 4.Caller ID Display# View or print a list of the last 30 Caller IDs stored in memory. 37 Print Report 39 42 3.Copy 1.
Menu and Features Main Menu Submenu 4.Print Reports Menu Selections Options Descriptions Page 1.XMIT Verify — — Prints a Transmission Verification Report for your last transmission. 55 2.Help List — — Prints the Help List so you can see at-a-glance how to quickly program your machine. 56 3.Quick-Dial — — Lists name and numbers stored in the One-Touch and Speed-Dial memory, in numerical order. 56 4.Fax Journal — — Lists information about the last incoming and outgoing faxes.
Entering Text Special characters and symbols C Press l, # or 0, and then press d or c to move the cursor under the special character or symbol you want. Then press OK to choose it. When you are setting certain menu selections, such as the Station ID, you may need to enter text into the machine. Most dial pads have three or four letters printed on keys. The keys for 0, # and l do not have printed letters because they are used for special characters.
D Specifications D General D Memory Capacity 16 MB ADF (automatic document feeder) Up to 20 pages Temperature: 20° C - 30° C (68° F - 86° F) Humidity: 50% - 70% (for using the ADF) Paper: [80 g/m2(20 lb)] A4 size Paper Tray 100 Sheets [80 g/m2(20 lb)] Printer Type Ink Jet Print Method Mono: Piezo with 94 × 1 nozzles Colour: Piezo with 94 × 3 nozzles LCD (Liquid Crystal Display) 16 characters × 1 line Power Source AC 220 to 240V 50/60Hz Power Consumption Power Save Mode: Average 4 W
Print media Paper Input D Paper Tray Paper type: Plain paper, inkjet paper (coated paper), glossy paper 2, transparencies 1 2 and envelopes Paper size: Letter, Legal, Executive, A4, A5, A6, JIS B5, envelopes (commercial No.10, DL, C5, Monarch, JE4), Photo Card, Index card and Post card 3. For more details, see Paper weight, thickness and capacity for paper tray on page 10.
Specifications Fax D Compatibility Coding System Modem Speed ITU-T Group 3 MH/MR/MMR/JPEG Automatic Fallback Document Size 33,600 bps ADF Width: 89 mm to 215.9 mm (3.5 in. to 8.5 in.) Scanning Width Printing Width Grey Scale Polling Types Contrast Control ADF Height: 127 mm to 355.6 mm (5 in. to 14 in.) 208 mm (8.2 in.) 204 mm (8.03 in.) 256 levels Standard, Secure, Timer, Sequential: (Monochrome only) Automatic/Light/Dark Resolution (manual setting) Horizontal 8 dot/mm (203 dot/in.
Copy D Colour/Monochrome Yes/Yes Document Size ADF Width: 89 mm to 215.9 mm (3.5 in. to 8.5 in.) ADF Height: 127 mm to 355.6 mm (5 in. to 14 in.
Specifications Scanner D Colour/Monochrome Yes/Yes TWAIN Compliant Yes (Windows® 98/98SE/Me/2000 Professional/ XP 1/Windows®XP Professional x64 Edition) Mac OS ® X 10.2.4 or greater WIA Compliant Yes (Windows® XP 1) Colour Depth 36 bit colour Processing (Input) 24 bit colour Processing (Output) (Actual Input: 30 bit colour/Actual Output: 24 bit colour) Resolution Up to 2400 × 2400 dpi (interpolated) 2 Up to 600 × 1200 dpi (optical) Scanning Speed Colour: up to 9.03 sec. Mono: up to 4.05 sec.
Printer Printer Driver D Windows® 98/98SE/Me/2000 Professional and XP 1/Windows® XP Professional x64 Edition driver supporting Brother Native Compression mode and bi-directional capability Brother Ink Driver For Mac OS® X 10.2.
Specifications Computer requirements D Minimum System Requirements Computer Platform & Operating System Version Supported PC Processor PC Interface Minimum Software Speed Functions Minimum Recommended Available Hard RAM RAM Disk Space Windows® 1 98, 98SE Operating Me Systems 2000 Professional Printing, USB PC-FAX Send 3, Scanning 32 MB 128 MB 120 MB 130 MB 64 MB 256 MB Intel® Pentium® II or equivalent for for Drivers Applications 128 MB 256 MB 170 MB 220 MB XP Home XP Professional XP Professi
Consumable items Ink The machine uses individual Black, Yellow, Cyan and Magenta ink cartridges that are separate from the print head assembly. Service Life of Ink Cartridge Black - Approximately 500 pages at 5% coverage. Yellow, Cyan and Magenta - Approximately 400 pages at 5% coverage The first time you install a set of ink cartridges the machine will use an amount of ink to fill the ink delivery tubes for high quality print outs. This process will only happen once.
E Glossary E This is a comprehensive list of features and terms that appear in Brother manuals. Availability of these features depends on the model you purchased. ADF (automatic document feeder) The document can be placed in the ADF and scanned one page at a time automatically. Auto Reduction Reduces the size of incoming faxes. Automatic fax transmission Sending a fax without picking up the handset of an external phone.
ECM (Error Correction Mode) Detects errors during fax transmission and resends the pages of the fax that had an error. Fax tones The signals sent by sending and receiving fax machines while communicating information. Extension phone A telephone using the same line as your fax but plugged into a separate wall socket. Fax/Tel You can receive faxes and telephone calls. Do not use this mode if you are using a telephone answering device (TAD).
Glossary Menu mode Programming mode for changing your machine's settings. Remaining jobs You can check which jobs are waiting in memory and cancel jobs individually. OCR (optical character recognition) Remote Access Code Your own four-digitcode (---l) that allows you to call and access your machine from a remote location. ® The bundled (ScanSoft Paperport® SE with OCR or Presto!® PageManager) software application converts an image of text to text you can edit.
Super Fine resolution 392 × 203 dpi. Best for very small print and line art. Temporary settings You can choose certain options for each fax transmission and copy without changing the default settings. Tone (Not available in New Zealand) A form of dialling on the telephone line used for Touch Tone telephones. Transmission The process of sending faxes over the phone lines from your machine to the receiving fax machine.
F Index A ADF (automatic document feeder) ...... 6, 22 ADF cover ................................................91 Answering machine (TAD) .......................42 connecting ............................................43 Apple® Macintosh® See Software User's Guide on the CD-ROM. .................................................. Automatic fax receive ............................................28 Fax Detect .........................................31 B Broadcasting ....................................
F Fax codes changing ........................................ 45, 51 Fax Receive Code ................................44 Remote Access Code ...........................51 Telephone Answer Code ......................44 Fax Detect ................................................31 Fax Forwarding changing remotely .......................... 53, 54 programming a number .........................50 Fax Storage .............................................50 turning on ..............................................
Menu Table ............................................103 Mode, entering Copy .....................................................62 Fax ........................................................22 Scan ........................................................ 5 Multi-line connections (PABX) .................43 O One-Touch changing ...............................................48 setting up ..............................................48 using .....................................................
scan ....................................................117 setting for next fax .................................24 Ring Delay, setting ...................................30 S Scanning See Software User's Guide on the CD-ROM. .................................................. Serial Number how to find .............. See inside front cover Shipping the machine ............................101 Speed-Dial changing ...............................................48 dialing .....................................
For Australia Warranty – For details about the warranty on your Brother Product, please visit: www.brother.com.au Repair – For warranty service for your Brother Product you will need evidence of original purchase (e.g. a copy of the sales docket). Contact Brother International (Aust) Pty Ltd for details about your nearest Authorised Warranty Centre or visit: www.brother.com.au Support – For support for your Brother Product other than what you can resolve through the User Guide, Visit our website: www.
Visit us on the World Wide Web http://www.brother.com This machine is approved for use in the country of purchase only. Local Brother companies or their dealers will only support machines purchased in their own countries.
