User Manual
Table Of Contents
- USER’S GUIDE FAX-1840C/MFC-3240C
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- 3 Setup Send
- How to enter Fax mode
- How to dial
- How to Fax (B&W and Colour)
- Basic sending operations
- Advanced sending operations
- Broadcasting (Not available for colour faxes)
- Overseas Mode
- Delayed Fax (Not available for colour faxes)
- Delayed Batch Transmission (Not available for colour faxes)
- Setup for Polled Transmit (Standard) (Not available for colour faxes)
- Setup for Polled Transmit with Secure Code (Not available for colour faxes)
- TX Lock (Key Lock for some countries)
- 4 Setup Receive
- Basic receiving operations
- Choosing the Receive Mode
- Setting the Ring Delay
- Setting the F/T Ring Time (Fax/Tel mode only)
- Fax Detect (MFC-3240C only)
- Fax Detect (FAX-1840C only)
- Printing a reduced incoming fax (Auto Reduction)
- Receiving a fax at the end of a conversation
- Printing a fax from the memory
- Reception into memory (Not available for colour fax reception)
- Polling
- Basic receiving operations
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options (Not available for colour faxes)
- 7 Printing reports
- 8 Making copies
- 9 Important information
- 10 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your machine
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
PRINTING REPORTS 7 - 3
Printing reports
Following reports are available:
How to print a report
1
For MFC-3240C, press
Menu/Set
,
4
.
—OR—
For FAX-1840C, press
Ink Management/Reports
while
holding down the
Shift
key.
2
Press
▲
or
▼
to select the report you want.
Press
Menu/Set
.
—OR—
Enter the number of the report you want to print.
For example, press
1
to print the Help List.
3
Press
Mono Start
.
1.Help List
Prints the Help List so you can see at-a-glance
how to quickly program your machine.
2.Quick-Dial
Lists names and numbers stored in the
One-Touch and Speed-Dial memory, in numerical
order.
3.Fax Journal
Lists information about the last incoming and
outgoing faxes.
(TX means Transmit.) (RX means Receive.)
4.XMIT Verify
Prints a Transmission Verification Report for your
last transmission.