User Manual
Table Of Contents
- USER’S GUIDE FAX-1840C/MFC-3240C
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- 3 Setup Send
- How to enter Fax mode
- How to dial
- How to Fax (B&W and Colour)
- Basic sending operations
- Advanced sending operations
- Broadcasting (Not available for colour faxes)
- Overseas Mode
- Delayed Fax (Not available for colour faxes)
- Delayed Batch Transmission (Not available for colour faxes)
- Setup for Polled Transmit (Standard) (Not available for colour faxes)
- Setup for Polled Transmit with Secure Code (Not available for colour faxes)
- TX Lock (Key Lock for some countries)
- 4 Setup Receive
- Basic receiving operations
- Choosing the Receive Mode
- Setting the Ring Delay
- Setting the F/T Ring Time (Fax/Tel mode only)
- Fax Detect (MFC-3240C only)
- Fax Detect (FAX-1840C only)
- Printing a reduced incoming fax (Auto Reduction)
- Receiving a fax at the end of a conversation
- Printing a fax from the memory
- Reception into memory (Not available for colour fax reception)
- Polling
- Basic receiving operations
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options (Not available for colour faxes)
- 7 Printing reports
- 8 Making copies
- 9 Important information
- 10 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your machine
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
5 - 2 QUICK-DIAL NUMBERS AND DIALLING OPTIONS
4
Use the dial pad to enter the name (up to 15 characters).
Press
Menu/Set
.
(You can use the chart on page B-9 to help you enter letters.)
—OR—
Press
Menu/Set
to store the number without a name.
5
Go to Step 2 to store another One-Touch number.
—OR—
Press
Stop/Exit
.
Storing Speed-Dial numbers
You can store Speed-Dial numbers, so that when you dial you will
only have to press a few keys (
Search/Speed Dial
,
#
, the two-digit
number, and
Mono Start
or
Colour Start
). The machine can store
40 Speed-Dial numbers.
1
Press
Menu/Set
,
2
,
3
,
2
.
2
Use the dial pad to enter a two-digit
Speed-Dial location number (01-40).
(For example, press
05
.)
Press
Menu/Set
.
3
Enter the phone or fax number (up to 20 digits).
Press
Menu/Set
.
4
Use the dial pad to enter the name (up to 15 characters).
Press
Menu/Set
.
(You can use the
chart on page B-9 to help you enter letters.)
—OR—
Press
Menu/Set
to store the number without a name.
5
Go to Step 2 to store another Speed-Dial number.
—OR—
Press
Stop/Exit
.
2.Speed Dial