User Manual
Table Of Contents
- USER’S GUIDE FAX-1840C/MFC-3240C
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- 3 Setup Send
- How to enter Fax mode
- How to dial
- How to Fax (B&W and Colour)
- Basic sending operations
- Advanced sending operations
- Broadcasting (Not available for colour faxes)
- Overseas Mode
- Delayed Fax (Not available for colour faxes)
- Delayed Batch Transmission (Not available for colour faxes)
- Setup for Polled Transmit (Standard) (Not available for colour faxes)
- Setup for Polled Transmit with Secure Code (Not available for colour faxes)
- TX Lock (Key Lock for some countries)
- 4 Setup Receive
- Basic receiving operations
- Choosing the Receive Mode
- Setting the Ring Delay
- Setting the F/T Ring Time (Fax/Tel mode only)
- Fax Detect (MFC-3240C only)
- Fax Detect (FAX-1840C only)
- Printing a reduced incoming fax (Auto Reduction)
- Receiving a fax at the end of a conversation
- Printing a fax from the memory
- Reception into memory (Not available for colour fax reception)
- Polling
- Basic receiving operations
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options (Not available for colour faxes)
- 7 Printing reports
- 8 Making copies
- 9 Important information
- 10 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your machine
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
4 - 10 SETUP RECEIVE
Sequential Polling
The machine can request documents from several fax units in a
single operation. You just specify several destinations in Step 5.
Afterwards, a Sequential Polling Report will be printed.
1
If it is not illuminated in green, press (
Fax
).
2
Press
Menu/Set
,
2
,
1
,
7
.
3
Press
▲
or
▼
to choose
Standard
,
Secure
or
Timer
.
Press
Menu/Set
when the screen displays the setting you
want.
4
If you selected
Standard
, go to Step 5.
■
If you selected
Secure
, enter a four-digit number and press
Menu/Set
, and then go to Step 5.
■
If you selected
Timer
, enter the time (in 24-hour format) you
want to begin polling and press
Menu/Set
, and then go to
Step 5.
5
Specify the destination fax machines, which you wish to poll by
using One-Touch, Speed-Dial, Search, a Group (see Setting up
Groups for Broadcasting on page 5-4) or the dial pad. You must
press
Menu/Set
between each location.
6
Press
Mono Start
or
Colour Start
.
The machine polls each number or group in turn for a document.
Press
Stop/Exit
while the machine is dialling to cancel the
polling process.
To cancel all sequential polling receive jobs, press
Menu/Set
,
2
,
6
. (See
Cancelling a scheduled job
on page 3-10.)
7.Polling RX