User Manual
Table Of Contents
- USER’S GUIDE FAX-1840C/MFC-3240C
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- 3 Setup Send
- How to enter Fax mode
- How to dial
- How to Fax (B&W and Colour)
- Basic sending operations
- Advanced sending operations
- Broadcasting (Not available for colour faxes)
- Overseas Mode
- Delayed Fax (Not available for colour faxes)
- Delayed Batch Transmission (Not available for colour faxes)
- Setup for Polled Transmit (Standard) (Not available for colour faxes)
- Setup for Polled Transmit with Secure Code (Not available for colour faxes)
- TX Lock (Key Lock for some countries)
- 4 Setup Receive
- Basic receiving operations
- Choosing the Receive Mode
- Setting the Ring Delay
- Setting the F/T Ring Time (Fax/Tel mode only)
- Fax Detect (MFC-3240C only)
- Fax Detect (FAX-1840C only)
- Printing a reduced incoming fax (Auto Reduction)
- Receiving a fax at the end of a conversation
- Printing a fax from the memory
- Reception into memory (Not available for colour fax reception)
- Polling
- Basic receiving operations
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options (Not available for colour faxes)
- 7 Printing reports
- 8 Making copies
- 9 Important information
- 10 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your machine
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
SETUP SEND 3 - 18
Setting up the password
1
Press
Menu/Set
,
2
,
0
,
1
.
2
Enter a 4-digit number for the
password.
Press
Menu/Set
.
3
If the LCD shows
Verify:
, re-enter the password.
Press
Menu/Set
.
Changing the TX Lock password
1
Press
Menu/Set
,
2
,
0
,
1
.
2
Press
▲
or
▼
to select
Set
Password
.
Press
Menu/Set
.
3
Enter a 4-digit number for the current password.
Press
Menu/Set
.
4
Enter a 4-digit number for a new password.
Press
Menu/Set
.
5
If the LCD shows
Verify:
, re-enter the password.
Press
Menu/Set
.
If you forget the TX Lock password, please contact your Brother
dealer or Brother for assistance.
1.TX Lock
1.TX Lock