User Manual
Table Of Contents
- USER’S GUIDE FAX-1840C/MFC-3240C
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- 3 Setup Send
- How to enter Fax mode
- How to dial
- How to Fax (B&W and Colour)
- Basic sending operations
- Advanced sending operations
- Broadcasting (Not available for colour faxes)
- Overseas Mode
- Delayed Fax (Not available for colour faxes)
- Delayed Batch Transmission (Not available for colour faxes)
- Setup for Polled Transmit (Standard) (Not available for colour faxes)
- Setup for Polled Transmit with Secure Code (Not available for colour faxes)
- TX Lock (Key Lock for some countries)
- 4 Setup Receive
- Basic receiving operations
- Choosing the Receive Mode
- Setting the Ring Delay
- Setting the F/T Ring Time (Fax/Tel mode only)
- Fax Detect (MFC-3240C only)
- Fax Detect (FAX-1840C only)
- Printing a reduced incoming fax (Auto Reduction)
- Receiving a fax at the end of a conversation
- Printing a fax from the memory
- Reception into memory (Not available for colour fax reception)
- Polling
- Basic receiving operations
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options (Not available for colour faxes)
- 7 Printing reports
- 8 Making copies
- 9 Important information
- 10 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your machine
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
SETUP SEND 3 - 10
Checking job status
Check which jobs are still waiting in the memory to be sent. (If there
are no jobs, the LCD shows
No Jobs Waiting
.)
1
Press
Menu/Set
,
2
,
6
.
2
If you have more than one job
waiting, press
▲
or
▼
to scroll through the list.
3
Press
Stop/Exit
.
Cancelling a fax in progress
If you want to cancel a fax, while the machine is scanning, dialling or
sending it, press
Stop/Exit
.
Cancelling a scheduled job
You can cancel a fax job that is stored and waiting in the memory.
1
Press
Menu/Set
,
2
,
6
.
Any jobs that are waiting will appear
on the LCD.
2
If you have more than one job waiting, press
▲
or
▼
to select the
job you want to cancel.
Press
Menu/Set
.
—OR—
If you only have one job waiting, go to Step 3.
3
Press
1
to cancel.
To cancel another job go to Step 2.
—OR—
Press
2
to exit without cancelling.
4
Press
Stop/Exit
.
6.Remaining Jobs
6.Remaining Jobs