User Manual
Table Of Contents
- USER’S GUIDE FAX-1840C/MFC-3240C
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- 3 Setup Send
- How to enter Fax mode
- How to dial
- How to Fax (B&W and Colour)
- Basic sending operations
- Advanced sending operations
- Broadcasting (Not available for colour faxes)
- Overseas Mode
- Delayed Fax (Not available for colour faxes)
- Delayed Batch Transmission (Not available for colour faxes)
- Setup for Polled Transmit (Standard) (Not available for colour faxes)
- Setup for Polled Transmit with Secure Code (Not available for colour faxes)
- TX Lock (Key Lock for some countries)
- 4 Setup Receive
- Basic receiving operations
- Choosing the Receive Mode
- Setting the Ring Delay
- Setting the F/T Ring Time (Fax/Tel mode only)
- Fax Detect (MFC-3240C only)
- Fax Detect (FAX-1840C only)
- Printing a reduced incoming fax (Auto Reduction)
- Receiving a fax at the end of a conversation
- Printing a fax from the memory
- Reception into memory (Not available for colour fax reception)
- Polling
- Basic receiving operations
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options (Not available for colour faxes)
- 7 Printing reports
- 8 Making copies
- 9 Important information
- 10 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your machine
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
1 - 6 INTRODUCTION
Power Save Setting
You can customise the machine’s
Power Save
key. The default
mode is
Fax Receive:On
, so your machine can receive faxes or
calls even when the machine is in Power Save mode. If you do not
want your machine to receive faxes or calls, turn this setting to
Fax Receive:Off
. (See
Turning the machine to Power Save
condition
on page 1-5.)
1
Press
Menu/Set
,
1
,
5
.
2
Press
▲
or
▼
to select
Off
(or
On
).
3
Press
Menu/Set
.
4
Press
Stop/Exit
.
*
1
Should be set before you switch off the machine.
*
2
You can not receive a fax automatically even if you have set the receive mode to
Fax/Tel
. (MFC-3240C only)
On/Off Setting Receive Mode Available Operations
Fax Receive:On
(default)
Fax Only
External TAD
Fax Receive (automatically), Fax
Detect, Delayed Fax*
1
, Remote Fax
Options*
1
, Remote Retrieval*
1
:
■
(FAX-1840C only) You can receive
telephone calls by lifting the
handset.
Manual
Fax/Tel
*
2
Delayed Fax*
1
, Fax Detect:
■
(FAX-1840C only) You can receive
telephone calls by lifting the
handset.
Fax Receive:Off
— No machine operations will be
available.
5.P.Save Setting