User Manual
Table Of Contents
- USER’S GUIDE FAX-1840C/MFC-3240C
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- 3 Setup Send
- How to enter Fax mode
- How to dial
- How to Fax (B&W and Colour)
- Basic sending operations
- Advanced sending operations
- Broadcasting (Not available for colour faxes)
- Overseas Mode
- Delayed Fax (Not available for colour faxes)
- Delayed Batch Transmission (Not available for colour faxes)
- Setup for Polled Transmit (Standard) (Not available for colour faxes)
- Setup for Polled Transmit with Secure Code (Not available for colour faxes)
- TX Lock (Key Lock for some countries)
- 4 Setup Receive
- Basic receiving operations
- Choosing the Receive Mode
- Setting the Ring Delay
- Setting the F/T Ring Time (Fax/Tel mode only)
- Fax Detect (MFC-3240C only)
- Fax Detect (FAX-1840C only)
- Printing a reduced incoming fax (Auto Reduction)
- Receiving a fax at the end of a conversation
- Printing a fax from the memory
- Reception into memory (Not available for colour fax reception)
- Polling
- Basic receiving operations
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options (Not available for colour faxes)
- 7 Printing reports
- 8 Making copies
- 9 Important information
- 10 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your machine
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
1 - 4 INTRODUCTION
6
Liquid Crystal Display (LCD)
Displays messages on the screen to
help you set up and use your
machine.
7
Dial Pad
Use these keys to dial telephone
and fax numbers and as a keyboard
for entering information into the
machine.
The # key lets you temporarily
switch the dialling mode during a
telephone call from Pulse to Tone.
(Not available in New Zealand)
8
Navigation keys:
Menu/Set
The same key is used for Menu and
Set operations. Lets you access the
Menu to program and store your
settings in the machine.
You can press these keys to adjust
the volume.
▲
Search/Speed Dial
Lets you look up numbers that are
stored in the dialling memory. It also
lets you dial stored numbers by
pressing # and a two-digit number.
Press to scroll backward to a menu
selection.
▲
or
▼
Press to scroll through the menus
and options.
9
Power Save
You can turn the machine to power
save condition.
▲
0
Colour Start
Lets you start sending faxes or
make copies in full colour.
Also for MFC-3240C, lets you start a
scanning operation (in colour or
mono, depending on the scanning
setting on your PC).
A
Mono Start
Lets you start sending faxes or
make copies in black and white.
Also for MFC-3240C, lets you start a
scanning operation (in colour or
mono, depending on the scanning
setting on your PC).
B
Stop/Exit
Stops an operation or exits from the
menu.