User Manual
Table Of Contents
- USER’S GUIDE FAX-1840C/MFC-3240C
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- 3 Setup Send
- How to enter Fax mode
- How to dial
- How to Fax (B&W and Colour)
- Basic sending operations
- Advanced sending operations
- Broadcasting (Not available for colour faxes)
- Overseas Mode
- Delayed Fax (Not available for colour faxes)
- Delayed Batch Transmission (Not available for colour faxes)
- Setup for Polled Transmit (Standard) (Not available for colour faxes)
- Setup for Polled Transmit with Secure Code (Not available for colour faxes)
- TX Lock (Key Lock for some countries)
- 4 Setup Receive
- Basic receiving operations
- Choosing the Receive Mode
- Setting the Ring Delay
- Setting the F/T Ring Time (Fax/Tel mode only)
- Fax Detect (MFC-3240C only)
- Fax Detect (FAX-1840C only)
- Printing a reduced incoming fax (Auto Reduction)
- Receiving a fax at the end of a conversation
- Printing a fax from the memory
- Reception into memory (Not available for colour fax reception)
- Polling
- Basic receiving operations
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options (Not available for colour faxes)
- 7 Printing reports
- 8 Making copies
- 9 Important information
- 10 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your machine
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
INTRODUCTION 1 - 3
1
One-Touch keys
These keys give you instant access
to previously stored Quick-Dial
numbers.
Shift
To access a One-Touch number in
a black square on the control panel,
hold down this key as you press the
One-Touch key.
2
Ink Management
(MFC-3240C only)
Lets you clean the print head, check
the print quality, and check the
available ink volume.
Ink Management/Reports
(FAX-1840C only)
Lets you clean the print head, check
the print quality, and check the
available ink volume.
—OR—
Lets you access the Reports menu if
pressed while holding it down with
the Shift key.
3
Copy keys
Options
You can quickly and easily select
temporary settings for copying.
Quality
Use this key for temporary copy
settings.
4
Fax and telephone keys
Hook (MFC-3240C only)
Press before dialling if you want to
make sure a fax machine will
answer, and then press Mono Start
or Colour Start.
Hook/Hold/Recall
(FAX-1840C only)
Use to swap the line between
handset and monitor speaker.
—OR—
Lets you place calls on hold.
—OR—
Also, use this key pressing with
Shift key to gain access to an
outside line and/or to recall the
operator or transfer a call to another
extension when it is connected to a
PABX.
Redial/Pause
Redials the last number you called.
It also inserts a pause in quick-dial
numbers.
Fax Resolution
Adjusts the resolution when you
send a fax.
5
Mode keys:
Fax
Lets you access Fax mode.
Scan
(MFC-3240C only)
Lets you access Scan mode.
Copy
Lets you access Copy mode.