User Manual
Table Of Contents
- USER’S GUIDE FAX-1840C/MFC-3240C
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- 3 Setup Send
- How to enter Fax mode
- How to dial
- How to Fax (B&W and Colour)
- Basic sending operations
- Advanced sending operations
- Broadcasting (Not available for colour faxes)
- Overseas Mode
- Delayed Fax (Not available for colour faxes)
- Delayed Batch Transmission (Not available for colour faxes)
- Setup for Polled Transmit (Standard) (Not available for colour faxes)
- Setup for Polled Transmit with Secure Code (Not available for colour faxes)
- TX Lock (Key Lock for some countries)
- 4 Setup Receive
- Basic receiving operations
- Choosing the Receive Mode
- Setting the Ring Delay
- Setting the F/T Ring Time (Fax/Tel mode only)
- Fax Detect (MFC-3240C only)
- Fax Detect (FAX-1840C only)
- Printing a reduced incoming fax (Auto Reduction)
- Receiving a fax at the end of a conversation
- Printing a fax from the memory
- Reception into memory (Not available for colour fax reception)
- Polling
- Basic receiving operations
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options (Not available for colour faxes)
- 7 Printing reports
- 8 Making copies
- 9 Important information
- 10 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your machine
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
APPENDIX B B - 6
2
.
Fax
(Continued)
4
.
Report
Setting
1
.
Transmission
On
On+Image
Off
Off+Image
Initial setup for
Transmission
Verification Report
and Journal Report.
7-1
2
.
Journal
Period
Every 7 Days
Every 2 Days
Every 24
Hours
Every 12
Hours
Every 6
Hours
Every 50
Faxes
Off
7-2
5
.
Remote Fax
Opt
1
.
Forward/
Store
Off
Fax Forward
Fax Storage
Sets the machine to
forward fax messages,
to store incoming faxes
in the memory (so you
can retrieve them while
you are away from your
machine).
6-2
2
.
Remote
Access
--- You must set your
own code for Remote
Retrieval.
6-3
3
.
Print
Document
— Prints incoming faxes
stored in the memory.
4-7
6
.
Remaining
Jobs
——
Checks which jobs are in
the memory and lets you
cancel selected jobs.
3-10
0
.
Miscellaneous
1
.
TX Lock
(1.Key Lock)
—
Prohibits most functions
except receiving faxes.
3-17
2
.
Compatibility
High
(MFC-3240C only)
Normal
Basic
Adjust the
Equalization for
transmission
problems.
10-12
3
.
Distinctive
(Not available in
New Zealand)
On
Off
Use with phone company
distincive ringing service
to register the ring pattern
with the machine.
A-1
A-11
3
.
Faxability
(For New
Zealand Only)
On
Off
If you have FaxAbility
from Telecom, you can
use this function to
store the ringing pattern
of your fax number.
And if you set in to ON,
you should use the
registered number only.
A-6
4
.
Caller ID
Display#
Print Report
View or print a list of
the last 30 Caller IDs
stored in memory.
A-3
A-9
A-12
Main Menu Submenu Menu
Selections
Options Descriptions Page
The factory settings are shown in Bold.