User Manual
Table Of Contents
- USER’S GUIDE FAX-1840C/MFC-3240C
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- 3 Setup Send
- How to enter Fax mode
- How to dial
- How to Fax (B&W and Colour)
- Basic sending operations
- Advanced sending operations
- Broadcasting (Not available for colour faxes)
- Overseas Mode
- Delayed Fax (Not available for colour faxes)
- Delayed Batch Transmission (Not available for colour faxes)
- Setup for Polled Transmit (Standard) (Not available for colour faxes)
- Setup for Polled Transmit with Secure Code (Not available for colour faxes)
- TX Lock (Key Lock for some countries)
- 4 Setup Receive
- Basic receiving operations
- Choosing the Receive Mode
- Setting the Ring Delay
- Setting the F/T Ring Time (Fax/Tel mode only)
- Fax Detect (MFC-3240C only)
- Fax Detect (FAX-1840C only)
- Printing a reduced incoming fax (Auto Reduction)
- Receiving a fax at the end of a conversation
- Printing a fax from the memory
- Reception into memory (Not available for colour fax reception)
- Polling
- Basic receiving operations
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options (Not available for colour faxes)
- 7 Printing reports
- 8 Making copies
- 9 Important information
- 10 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your machine
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
APPENDIX B B - 4
1.General
Setup
(Continued)
5.P.Save
Setting
— On
Off
Customizes the
Power Save key not
to receive fax in
power save
condition.
1-6
6.LCD
Contrast
— Light
Dark
Adjust the contrast of
the LCD.
2-8
2.Fax 1.Setup
Receive
(In Fax mode
only)
1.Ring Delay 02-10(02)
(Example for
Australia)
Sets the number of
rings before the
machine answers in
Fax Only or Fax/Tel
mode.
4-2
2.F/T Ring
Time
70 Sec
40 Sec
30 Sec
20 Sec
(Example for
Australia)
Sets the
pseudo/double-ring
time in Fax/Tel
mode.
4-3
3.Fax Detect On
Semi
(FAX-1840C
only)
Off
Receives fax
messages without
pressing the
Mono Start or
Colour Start key.
4-4
4.Remote
Code
On
( 51, #51)
( 91, #91 for
New Zealand)
Off
You can answer all
calls at an extension
or external phone
and use codes to turn
the machine on or off.
You can personalize
these codes.
A-16
5.Auto
Reduction
On
Off
Reduces the size of
incoming faxes.
4-6
6.Memory
Receive
On
Off
Automatically stores
any incoming faxes
in its memory if it runs
out of paper.
4-7
7.Polling RX Standard
Secure
Timer
Sets up your
machine to poll
another fax machine.
4-8
Main Menu Submenu Menu
Selections
Options Descriptions Page
The factory settings are shown in Bold.