User Manual
Table Of Contents
- USER’S GUIDE FAX-1840C/MFC-3240C
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- 3 Setup Send
- How to enter Fax mode
- How to dial
- How to Fax (B&W and Colour)
- Basic sending operations
- Advanced sending operations
- Broadcasting (Not available for colour faxes)
- Overseas Mode
- Delayed Fax (Not available for colour faxes)
- Delayed Batch Transmission (Not available for colour faxes)
- Setup for Polled Transmit (Standard) (Not available for colour faxes)
- Setup for Polled Transmit with Secure Code (Not available for colour faxes)
- TX Lock (Key Lock for some countries)
- 4 Setup Receive
- Basic receiving operations
- Choosing the Receive Mode
- Setting the Ring Delay
- Setting the F/T Ring Time (Fax/Tel mode only)
- Fax Detect (MFC-3240C only)
- Fax Detect (FAX-1840C only)
- Printing a reduced incoming fax (Auto Reduction)
- Receiving a fax at the end of a conversation
- Printing a fax from the memory
- Reception into memory (Not available for colour fax reception)
- Polling
- Basic receiving operations
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options (Not available for colour faxes)
- 7 Printing reports
- 8 Making copies
- 9 Important information
- 10 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your machine
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
APPENDIX A A - 1
A
Telephone Service for Australia
Telstra
®
FaxStream
®
Duet
®
(Distinctive Ringing)
Telstra
®
FaxStream
®
Duet
®
is an enhanced Public Switched
Telephone Service (PSTS) offered by Telstra
®
that allows you to
have an additional number on one phone line, with its own distinctive
ring pattern. Telstra
®
FaxStream
®
Duet
®
is a call handling feature
that helps users distinguish voice and facsimile calls. With
FaxStream
®
Duet
®
, incoming calls to a fax number are announced
by a different, distinctive ring signal. Only one call can be answered
(or made) at any one time and while this call is in progress, incoming
calls to either number will be presented with a busy tone.
Your MFC has a Distinctive Ringing function, allowing you to
dedicate one phone number just for receiving faxes.
What is the Advantage of using Telstra
®
FaxStream
®
Duet
®
Function?
Using Telstra
®
FaxStream
®
Duet
®
is the most efficient way to receive
both fax and telephone calls on the same line. When the voice call
comes in, all phones (extension and external) and the fax machine
will ring to alert you to pick it up. If a fax call comes in, the fax
machine will answer automatically without ringing, whereas the
extension and external phones will ring with a distinctive ring pattern.
It is also a more efficient way of operating a Fax machine with an
extension phone as you do not have to use the remote activation
codes. It gives you two independent numbers without the higher cost
of a second line.
Appendix A
After you have set the Distinctive Ring feature to
On
, the receive
mode is set to
Manual
automatically. Unless you have a TAD or
Voice Mail set up on the Distinctive Ring number,
Manual
mode
means you must answer all the calls yourself. You can not
change the receive mode to the other mode while the Distinctive
Ring is set to on.