User Manual
Table Of Contents
- USER’S GUIDE FAX-1840C/MFC-3240C
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- 3 Setup Send
- How to enter Fax mode
- How to dial
- How to Fax (B&W and Colour)
- Basic sending operations
- Advanced sending operations
- Broadcasting (Not available for colour faxes)
- Overseas Mode
- Delayed Fax (Not available for colour faxes)
- Delayed Batch Transmission (Not available for colour faxes)
- Setup for Polled Transmit (Standard) (Not available for colour faxes)
- Setup for Polled Transmit with Secure Code (Not available for colour faxes)
- TX Lock (Key Lock for some countries)
- 4 Setup Receive
- Basic receiving operations
- Choosing the Receive Mode
- Setting the Ring Delay
- Setting the F/T Ring Time (Fax/Tel mode only)
- Fax Detect (MFC-3240C only)
- Fax Detect (FAX-1840C only)
- Printing a reduced incoming fax (Auto Reduction)
- Receiving a fax at the end of a conversation
- Printing a fax from the memory
- Reception into memory (Not available for colour fax reception)
- Polling
- Basic receiving operations
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options (Not available for colour faxes)
- 7 Printing reports
- 8 Making copies
- 9 Important information
- 10 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your machine
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
TROUBLESHOOTING AND ROUTINE MAINTENANCE 10 - 17
Checking the ink volume
You can check the ink that is left in the cartridge.
1
Press
Ink Management
.
2
Press
▲
or
▼
to select
Ink Volume
.
Press
Menu/Set
.
3
Press
▲
or
▼
to select the colour you
want to check.
The LCD shows the ink volume.
4
Press
Stop/Exit
.
(MFC-3240C only) You can check the ink volume from your
computer. (See
MFC Remote Setup (not available for
DCP-110C, DCP-310CN and MFC-210C) on page 4-1 in
Software User’s Guide on the CD-ROM or MFC Remote Setup
(Mac OS
®
X 10.2.4 or greater) (not available for DCP-110C,
DCP-310CN and MFC-210C) on page 8-43 in Software User’s
Guide on the CD-ROM.)
Ink Volume
Bk:- +