Software User's Guide
Table Of Contents
- SOFTWARE USER'S GUIDE
- Table of Contents
- 1 Using the machine as a printer
- Using the Brother MFC printer driver
- Features
- Choosing the right type of paper
- How to print your original
- Simultaneous printing and faxing
- Clearing data from the memory
- Checking the Print Quality
- Printer operation keys
- Printer driver settings (Windows® only)
- How to access the printer driver settings
- Basic tab
- Advanced tab
- 2 How to scan using Windows®
- Scanning an original (For Windows® 98/98SE/Me and 2000 Professional only)
- Scanning an original (For Windows® XP only)
- Using the Scan key (For USB cable users)
- Using ScanSoft® PaperPort® and TextBridge® OCR
- 3 Using the Brother Control Center
- 4 Using the Windows® XP-Based Brother SmartUI Control Center
- Brother SmartUI Control Center
- Brother Control Center features
- Hardware Section: Changing the Scan to button configuration
- Software Section
- Scan to File
- Scan to E-mail
- Scan to OCR (Word Processing program)
- Scan to Graphics application (example: Microsoft Paint)
- PC Fax setting (PC-FAX using the Brother Fax Driver)
- Custom: User-defined buttons
- 5 Using MFC Remote Setup
- 6 Using Brother PC-FAX software
- PC-FAX sending
- Speed-Dial setup
- The Address Book
- Setting up a Member in the Address Book
- Setting up a Group for Broadcasting
- Editing Member information
- Deleting a Member or Group
- Exporting the Address Book
- Importing to the Address Book
- Setting up a Cover Page
- Entering Coverpage Information
- Sending a file as a PC-FAX using the Facsimile style user interface
- Sending a file as a PC-FAX using the Simple style user interface
- Setting up PC-FAX receiving (Windows® 98/98SE/Me and 2000 Professional) (MFC-3320CN and MFC-3820C...
- Receiving a fax into the PC (Windows® XP only) (MFC-3320CN and MFC-3820CN only)
- Additional Information for Network PC-FAX users with MFC-3320CN and MFC-3820CN
- 7 Using the PhotoCapture Center™ from your PC
- 8 Network Scanning (MFC-3320CN and MFC-3820CN only)
- 9 Using your machine with a Macintosh®
- Setting up your USB-equipped Apple® Macintosh®
- Using the Brother printer driver with your Apple® Macintosh® (Mac OS® 8.6-9.2)
- Using the Brother Printer Driver with Your Apple® Macintosh® (Mac OS® X)
- Sending a fax from your Macintosh® application
- Scanning from a Macintosh®
- Using Presto! PageManager®
- MFC Remote Setup (Mac OS® X)
- Using the PhotoCapture Center™ from a Macintosh® (MFC-3320CN and MFC-3820CN only)
- Index
2 - 19
HOW TO SCAN USING WINDOWS
®
Using the Scan key
(For USB cable users)
You can use (
Scan
) on the control panel to scan originals
into your word processing, graphics or E-mail applications or your
computer folder. The advantage of using (
Scan
) is that you
avoid the mouse clicks required to scan from your computer.
If you are using a Macintosh
®
computer the
(
Scan
)
key
will work only for Scan to Card. (For MFC-3220CN and
MFC-3820CN Only.)
Before you can use (
Scan
) on the control panel, you
must have connected the machine to your Windows
®
based
computer and loaded the appropriate Brother Drivers for your
version of Windows
®
.
When you are ready to use (
Scan
), make sure the
Brother Control Center application is running on your computer.
For details about how to configure the Brother Control Center
buttons to launch the application of your choice using
(
Scan
), go to the appropriate chapter:
■
For Windows
®
98/98SE/Me and 2000 Professional, see
Using the Brother Control Center
on page 3-1.
■
For Windows
®
XP, see
Using the Windows
®
XP-Based
Brother SmartUI Control Center on page 4-1.