Software User's Guide
Table Of Contents
- SOFTWARE USER'S GUIDE
- Table of Contents
- 1 Using the machine as a printer
- Using the Brother MFC printer driver
- Features
- Choosing the right type of paper
- How to print your original
- Simultaneous printing and faxing
- Clearing data from the memory
- Checking the Print Quality
- Printer operation keys
- Printer driver settings (Windows® only)
- How to access the printer driver settings
- Basic tab
- Advanced tab
- 2 How to scan using Windows®
- Scanning an original (For Windows® 98/98SE/Me and 2000 Professional only)
- Scanning an original (For Windows® XP only)
- Using the Scan key (For USB cable users)
- Using ScanSoft® PaperPort® and TextBridge® OCR
- 3 Using the Brother Control Center
- 4 Using the Windows® XP-Based Brother SmartUI Control Center
- Brother SmartUI Control Center
- Brother Control Center features
- Hardware Section: Changing the Scan to button configuration
- Software Section
- Scan to File
- Scan to E-mail
- Scan to OCR (Word Processing program)
- Scan to Graphics application (example: Microsoft Paint)
- PC Fax setting (PC-FAX using the Brother Fax Driver)
- Custom: User-defined buttons
- 5 Using MFC Remote Setup
- 6 Using Brother PC-FAX software
- PC-FAX sending
- Speed-Dial setup
- The Address Book
- Setting up a Member in the Address Book
- Setting up a Group for Broadcasting
- Editing Member information
- Deleting a Member or Group
- Exporting the Address Book
- Importing to the Address Book
- Setting up a Cover Page
- Entering Coverpage Information
- Sending a file as a PC-FAX using the Facsimile style user interface
- Sending a file as a PC-FAX using the Simple style user interface
- Setting up PC-FAX receiving (Windows® 98/98SE/Me and 2000 Professional) (MFC-3320CN and MFC-3820C...
- Receiving a fax into the PC (Windows® XP only) (MFC-3320CN and MFC-3820CN only)
- Additional Information for Network PC-FAX users with MFC-3320CN and MFC-3820CN
- 7 Using the PhotoCapture Center™ from your PC
- 8 Network Scanning (MFC-3320CN and MFC-3820CN only)
- 9 Using your machine with a Macintosh®
- Setting up your USB-equipped Apple® Macintosh®
- Using the Brother printer driver with your Apple® Macintosh® (Mac OS® 8.6-9.2)
- Using the Brother Printer Driver with Your Apple® Macintosh® (Mac OS® X)
- Sending a fax from your Macintosh® application
- Scanning from a Macintosh®
- Using Presto! PageManager®
- MFC Remote Setup (Mac OS® X)
- Using the PhotoCapture Center™ from a Macintosh® (MFC-3320CN and MFC-3820CN only)
- Index
USING THE PHOTOCAPTURE CENTER
™
FROM YOUR PC
7 - 3
For Network cable users
1
Insert a SmartMedia
®
, CompactFlash
®
, Memory Stick
®
or
SecureDigital card into your machine.
2
Double-click the Network PhotoCapture Center icon.
3
Your browser software will appear and a list of file names on
your media card will be shown.
4
Click the file name you wish to see.
When you take out a media card, do the following to prevent damage
to the media card:
5
Close the browser.
6
Wait until the PhotoCapture button stops blinking before taking
out the media card.
If more than two media cards are inserted at the same time, the
PhotoCapture Center
™
will read only the card that was put in
first. To have access to another card, you must first take out all
the cards, and then put in the media card you wish to access.
Your browser software accesses the media card using FTP and
the network Host Name of the machine.
Do NOT unplug the power cord, or remove a SmartMedia
®
,
CompactFlash
®
, Memory Stick
®
or SecureDigital card from the
machine while it is reading the card (PhotoCapture button
flashing). You could loose your data or damage the card.
If you took out the media card while PhotoCapture button was
flashing, you must immediately restart your PC before putting
the media card back in. If you put in another media card before
the PC is rebooted, the data on it may be destroyed.