User Manual
Table Of Contents
- SOFTWARE USER’S GUIDE
- Table of Contents
- Windows®
- 1 Printing
- 2 Scanning
- 3 ControlCenter3
- 4 Network Scanning (For models with built-in network support)
- 5 Remote Setup (Not available for DCP models, MFC-250C and MFC-290C)
- 6 Brother PC-FAX Software (MFC models only)
- 7 PhotoCapture Center™
- 8 Firewall settings (For Network users)
- Apple® Macintosh®
- 9 Printing and Faxing
- 10 Scanning
- 11 ControlCenter2
- 12 Network Scanning (For models with built-in network support)
- 13 Remote Setup & PhotoCapture Center™
- Index
- brother CHN-ENG
Scanning
56
2
Scan to File 2
You can scan a black and white or a colour document into your PC and save it as a file in the folder you
choose. The file type and specific folder are based on the settings you have chosen in the Scan to File
configuration screen of ControlCenter3. (See File on page 73.)
a Load your document.
b Press the (Scan) key.
c Press a or b to choose Scan to File.
Press OK.
d Press Mono Start or Colour Start.
The machine starts the scanning process.
For Touchscreen models
2
a Load your document.
b Press the (Scan) key.
c Press Scan to File.
d Press Mono Start or Colour Start.
The machine starts the scanning process.
Note
• If you want to change between colour and black and white scanning, choose colour or black and white in
the scan type option on the Device Button tab of the ControlCenter3 configuration screen. (See SCAN
on page 68.)
• If you would like to change the file name of scanned documents, enter the file name in File Name section
on the Device Button tab of the ControlCenter3 configuration.
• Scan type depends on the settings of the Device Button tab, Mono Start or Colour Start do not change
the settings.